MouseMFC210Casked Dec 8, 2006 at 6:06am
Error Message 4F on MFC 210C
Kept getting a "Unable to Print see Maintainace and Troubleshooting Guide" message.Only thing to do was clean the platen(?). Not the easiest part to find. They should make it another color... Finally called Brother...Went through the "key in blah,blah, and blah" bit. LCD Flashed error code 4F. Guy on the helpline didn't know what it meant(!!). Gave me an area repair shop. I'd like to know the code meaning so I can(if need be)make sure that the shop doesn't try to rip me off(repair est./self-repair instruc. would be nice from here, too). Thanks!
Machine: BROTHER MFC-J220
Error Code: Unable to Init 4F.
There IS NO "Menu/Set" button on the machine.
There IS a "Menu" button, I pressed the "Menu" button and the machine just beeped.
There was no visible response to buttons pressed afterwards. Stuck in the same spot.
This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.
You'd be surprised how this fixes inoperable MFC210c's--TRY THIS FIRST!
Did you ever get an answer to the final part of your question regarding the messages "unable to init." and "machine error A7"? Mine has a "machine error 4F."
Congratulations and good luck.
Samsung makes pretty good stuff!
I have MFC 440CN WITH THE MESSAGE UNABLE TO PRINT 4F, THEN I TRY TO DO THE INTERNAL MAINTANCE BUT I USE THE CODE FOR *2864 BUT I DIDNT WORK. NOW IT SAY MACHINE ERROR 4F AND I UNABLE TO DO NOTHING. CAN YOU HELP ME, PLEASE. THANKSS
THE USER'S MANUAL I HAVE, DOES NOT MENTION A MAINTENANCE MODE MENU!HELP NEEDED!
Error 4F usually means that there is a fault in the hardware associated with the print head.
And guys, please be aware that you loose warranty when playing aroung in Maintenance Mode. (Maintenance Mode was never intended to be operated by end-user, only by Service Partners)
I tried the maintenance mode menu Enter 80 and that has come up with 00:00 09:42 OK which I think is the default time?
any ides how to fix it?
Note: You need to reset both the purge and flushing counters.(Some say page counters to)
Press the Menu key on the touch panel and the Mono Start key on the control panel and then press the Scan key four times.
Press the Menu key on the touch panel followed by the *, 2, 8, 6 and 4 keys on the keypad.
The machine is placed in the initial stage of the maintenance mode in which it is ready to accept entry from the keys.
Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
Press the Mono Start key several times until the purge count appears on the LCD.
Press the 2, 7, 8, and 3 keys in this order to reset the purge count.
Press the Stop/Exit key to return to the initial stage of the maintenance mode.
Repeat Steps 3-6 to find and reset flush counter.
Press the 9 key twice to exit from the maintenance mode.
Plug out your printer for a couple minutes and then plug it back in.
Well i reset everything to 0 . but still doesn't seem to work with my dcp 6690cw
Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.