unknown

asked Jan 17, 2006 at 1:37am
Unknown Printer

canon mpc190 help with error messages please help

hi everybody I have a canon mpc 190 multifunction centre.
I have had it only a few months over a year and have hearly used it, when i turn it on the alarm light comes on and an error message that reads, check printer (press resume key).
I have checked the manual and cant find whats wrong with it but it also says the waste ink tank could be full and i need to take it to a canon person , but when i enquired they said it will prob be more worth it to get a new one, any ideas its frustrating i havent had much use from it and i dont want to pay another fortune for it.
Thanks chanelle
Chanelle,
Here is the reset code for the waste counter. If you have used it little you should be able to get away with just resetting, at least this time.

1) Enter service mode by pressing: MENU, COPY, SCAN, COPY, COPY
2) Select TEST MODE
3) Select (8) PRINTER TEST in TEST MODE
4) Select (3) (eeprom clear)
5) Select (0) (ink count)
6) Press the SET key
7) Press the STOP/RESET key (returning to the state in 3} ), then press power key to power off

Hope this helps?!
Dazz UK
by hpwizard on Jan 17, 2006 at 4:52am Add comment
thanks so much I have just followed your instructions and fixed my printer also. I could not afford a new printer and this one has been a gem until the waste ink tank full message came up. So thanks once again I now know where to look for further help.

Patsy
Australia - Anonymous
All of a sudden my printer comes up with the warning that I have the wrong cartridge, I have replaced same but I still receive the same message. Can someone help?
by unknown on Jan 27, 2006 at 2:08pm Add comment
I have Canon Mpc190 I have Wrong Cartridge error I try to make this step by ste

1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
but nothing changed cause I don't know exactly witch one is (SET)key I press (OK) in printer so that's right???? please help me in this I need my printer very much .
Thank you.
by siro on Mar 1, 2006 at 5:19am Add comment
I was about to invest in a new printer and tried this on my 8 year old MPC 190 and was suprised it worked and Iam using it the set key being the ok key works a treat thank you very much. - Anonymous
Hi I am in the same situation - just fixed the ink tank full then it said the print cartridge was jambed now wrong cartridge - have you had any luck??
by brianbrian on Oct 23, 2006 at 1:29am Add comment
I have a cannon mpc190 which has a error code wrong ink cartridge - I have only just recently cleaned the waste tank and reset the codes - looks like it is not just me in this situation - these manufacturers make me sick with there codes
by brianbrian on Oct 23, 2006 at 1:50am Add comment
GREAT MAN!!!

That method worked beautifully!

Graxie!
by unknown on Jan 18, 2007 at 7:08pm Add comment
not working :((
by Anonymous on Jul 28, 2007 at 4:28pm Add comment
my mpc 190 printer showing ##335 error code and the catridge is not moving. When i swich on the printer, some vibration sounds (like tuk,tuk) comming for a second and shows the error code ##335. I dont know how to rectify this fault? please help me brothers if anyone facing this same problems.
by unknown on Nov 9, 2007 at 9:26am Add comment
same problem as mentioned. one morning the printer came up first with **335. i fiddled with the cartridge with the "wrong cartridge" as the result. i tried the above mentioned routine but with o success. i also got confused about the "set" button. did you mean the "reset" or the "ok" button?
help would be much appreciated because i do not like to contribute towards the increase of waste on our planet. thanks heaps.
by wolfgang2 on Dec 27, 2007 at 10:00pm Add comment
Hi Friend!
Still i could not solve my printer problem of code #335 error. Can u help me in this regards..... - Anonymous
Still i could not soved that problems. Still iam waiting for someone can help me.
by Anonymous on Dec 28, 2007 at 4:20am Add comment
i will if i can find a solution... promise.
ciao
Wolfgang
by Anonymous on Jan 3, 2008 at 10:43pm Add comment
Hi , I was just wondering if anyone has fixed this problem , I have reset everything and still have error code 335 , Do you think that our printheads are getting to old?
by ainley on Jan 12, 2008 at 5:33am Add comment
Wait Friends1 i have given for repairs to the canon service station. I don't know how much they will charge me? If charges may so high....... i will leave the printer as gift to canon company.
by unknown on Jan 12, 2008 at 9:09am Add comment
hey guys same problem - can't recognise ink cartridge and gives error 5 ... however, i don't have the menu/copy/scan/copy/copy buttons?

any suggestions? pixma M190 is what it is! thanks!
by Anonymous on Apr 28, 2009 at 2:04am Add comment
The menu copy scan copy copy method doesn't work. and is the set key the OK button. please reply as soon as possible
by Anonymous on Oct 11, 2009 at 3:44am Add comment
I have a Canon MP190 getting E 1 3 when turned on and the color cartridge light flashes... any ideas? can't find the damn book
by unknown on Mar 12, 2010 at 5:01pm Add comment
http://resetcounter.com/inkjet/what-is-protection-counter/ This link my help to understand where is the problem. This reseting helps but the waste ink tank/sponge could be full and start to leak.
by unknown on Oct 24, 2010 at 12:20pm Add comment
i HAVE A CANON MP 190 AND IT KEEPS FLASHING E 1 6, AND WILL NOT SCAN OR COPY, ANY IDEAS ANYONE, BEFORE I GO MAD? LOL

Phil Watson
by unknown on Jan 19, 2011 at 3:52am Add comment
Thanks for the help! The steps worked like a charm.
by unknown on Feb 16, 2011 at 5:25pm Add comment
Call me crazy, but which is the menu button on the printer? Mine doesnt say menu? Theres that button next to the window that the error is flashing on or am I on a totally wrong thing? I have 2 copy buttons one black one color which obe do I push for the code? Or should I be in the control panel trying to fix the issue?? Please help I have kids who need this printer to wok asap!! HELP!!!!!!!!
by unknown on Mar 24, 2011 at 2:47pm Add comment

HP Photosmatr 5510 a fekete nyomtatásnál üreslapok






by simondani17 on Oct 16, 2016 at 4:52am Add comment
-1
i need some help from profesional
my canon mpc190 - cannot print black ink
by unknown on Mar 6, 2007 at 8:29pm Add comment