Rince
asked Feb 20, 2017 at 4:25am
Konica-Minolta MagiColor 2400W
Wont print color
USB connection. Status display shows green.
Print from word document in blue produces blank page with faint blue printing and then a paper jam (no paper visible inside)
Print same page in black and it works OK
Print same page in red and it produces the same as blue (faint print and then a paper jam (no paper visible inside))
So how do I fix colour printing?
Thanks for any information
I got the same paper jam issue few days back and I simply took the Inkjet printer support because it does not cost me much. My inkjet printer started working after few minutes. I'm pretty sure that they would be you out with the color issue as well.
Replacing the Thermo-Protector is not necessarily the solution. It may get the old fuser going but since it was tripped on both the old and the new fuser something else must be wrong. Proba ly up in the PSU board w/ the thermal regulation system. survival games
Dial a HP support number & HP Printer support (844)298-5888 (toll-free) and get connected with our professionals within a short period of time. Our main motive is to provide 100% customer satisfaction.
Dial a Acer customer service number & Acer Support (844)298-5888 (toll-free) and get connected with our professionals within a short period of time. Our main motive is to provide 100% customer satisfaction.
Dial a Adobe customer service number & Adobe Support (844)298-5888 (toll-free) and get connected with our professionals within a short period of time. Our main motive is to provide 100% customer satisfaction.
Dial a Compaq customer service number & Adobe Support (844)298-5888 (toll-free) and get connected with our professionals within a short period of time. Our main motive is to provide 100% customer satisfaction.
