[email protected]

asked Apr 16, 2016 at 7:31am
Brother Brother DCP J125

printer error code unable to print 4f

printer error code unable to print 4f is there any solution

Follow these instructions:

  1. Disconnect Brother Printer from power cord.
  2. Press OK button and while holding the OK button re-connect the printer to the power cord (electric source).
  3. It will display an error message "Machine Error 46" on the LCD
  4. After the Error code appear, press the "arrow up button" ( ^ ) there will be numbers that are going to be display.
  5. Choose 8 then press OK Button
  6. Press Arrow Up button again then choose Zero (0) and press OK Button Again, now you will enter Service Mode.
  7. Press "Mono Key/Button" 25 times or until "Purge Counter Appear"
  8. Now press arrow up (^) again then choose "2" press OK Button
  9. Press Arrow Up (^) again then choose "7" press OK Button
  10. Press Arrow Up (^) again then choose "8" press OK Button
  11. Press Arrow Up (^) again then choose "3" press OK Button
  12. The purge counter will be reset to Zero.
  13. Now Press Stop/Exit Button
  14. The printer will return to "Machine Error 46" again
  15. Press Arrow Up (^) then choose 9 press OK Button
  16. Press Arrow Up (^) again then once more choose 9 press OK Button
  17. The Printer will reset then wait until it power up again.
by moe on Apr 16, 2016 at 4:07pm Add comment