unknown

asked Jan 27, 2006 at 1:56pm
Epson Epson Stylus Photo R1800

Epson R1800, R800, R2400 Waste Ink System

just found this info from other epson forum

================================================================
Installation of Waste Ink system
http://www.inkrepublic.com/knowledgebase/R800WasteInk.asp
http://www.inkrepublic.com/knowledgebase/WasteInk.asp

Reset Counters
http://www.inkrepublic.com/knowledgebase/resetcounter.asp

Basically, these are for most epson printers:
1. Install CIS or Cartridge
2. Install Waste Ink Tube and Tank
3. Reset waste ink counter if printer locked up.
4. Reset master counter if printer locked up.
5. Dump waste ink if it is full.

keep doing 3 - 5, then you do not have to send your printer back to service.
================================================================
where can I buy the waste ink system?
from their website?
by unknown on Feb 2, 2006 at 10:36am Add comment
you dont have to purchase anything from InkRepublic.com. If you have two tubes and a small bottle, just follow their website and you can easily install it.

If you have CIS from them, they would include waste ink tubes in the package.
by Anonymous on Feb 10, 2006 at 10:27pm Add comment
Hi, Just installed a CISS to my r1800 and need the counter to reset.
The service utility does not support the reset waste ink counter yet. Anyone who knows an alternative?

Thanks, Jokofix
by Anonymous on Aug 16, 2006 at 3:42pm Add comment
I would like to know the Waste ink counter reset procedure for the R-1800 also. - feslope
This reset program will work

http://www.ssclg.com/epsone.shtml
- unknown
In the ssc you use the protection counter to re-set your waste ink pad counter - unknown
did anybody try to follow this epson R2400 waste ink installation video?
http://www.inkrepublic.com/KnowledgeBase/R2400WasteInk.asp
I am wondering where I can get such tubes?
by unknown on Sep 17, 2007 at 2:24pm Add comment
i have a feed problem print not right dont know if paper was pulled out of the back of machine or if the timing is out is there a default reset for this machine .... thanks
by unknown on Sep 21, 2007 at 5:48pm Add comment
I do not see anyway to reset the waste ink using ssc 4.30 (protection counter???) where?
by notryt on Oct 26, 2009 at 1:41pm Add comment
You can get the reset program directly from Epson's website, www.epson.com/ipr. Scroll down to the bottom of the page and enter the printer identification information. Make sure that you have changed\\cleaned the waste ink pads and\\or have some form of alternative waste ink system in place.
Hope this helps.
by unknown on Oct 28, 2009 at 11:10pm Add comment
I found the best place to go is a guy called Ian Richards you can contact him on 07596 635756 - he does a DVD and the waste pad kit - or you can go to him and he will do the job for you or he will come to you at your home or work place.
I called him out and fair play it cost me £250 but there was no VAT it included the waste pads and his travelling time and time on site. He was in and out within 35 minutes would have taken me a couple of hours.
He also gives great technical support on Epson printers but he will make a small charge of £10 for a length tech support helping hand which to be fair i think is fair.
I know he sells his DVD and waste pads kits for £86 including delivery DIY good idea.
Hope this helps - Anonymous