dalbatross

asked Jan 14, 2008 at 11:06pm
Canon Canon Color Bubblejet (BJC) i850

How to remove i850 print head

Can anyone tell me how to remove the print head from the Canon i850?
After removing the ink cartridges, I have tried pulling the print head out from the bottom, from the top, but it doesnt come out and feels like it will break if I pull it any harder. Is there a release? Thank you!
Go to canon web site - select support, printers, i series, i850, type in remove print head and then select the selection o how to remove the print head - they have an excellent video.

or http://www.usa.canon.com

Alternatively,

Remove cartridges and push print head lever UP
The print head IS NOT the full plastic part into which the cartridges go. It is at the back of the opening where the cartridge go. Put your fingers on each side of the plastic part which in INSIDE where the cartridges were, lift slightly up and pull out. the head is a small unit and should come out easily.

Good luck

Bill
by bsydnes on Jan 23, 2008 at 12:01pm Add comment