Loga

asked Feb 8, 2010 at 7:11pm
Canon Canon StaplerSorter E2

Canon MP145 E2 & E7 error..

Can anyone help to solve E2 & E7 problem in Canon MP145 printer, URGENT
Reset Waste Ink Canon MP160 dan MP145
Canon MP160 , MP145

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP145
1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF dan lepas STOP/RESET
2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x
3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE (muncul angka NOL)
4. Printer akan charging
5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x.
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye.
7. Tekan tombol ON/OFF 1X, angka berubah ke SATU (1)
8. Matikan printer dan cabut kabel POWER.
9. Hidupkan kembali printer

Kode Error Canon MP160 dan MP145
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
by Anonymous on May 10, 2010 at 3:02am Add comment
it doesn't work in with ma printer its Canon MP145 and I got a paper jam error but your suggestion doesn't seems to work out. Can u please get me a proper way to solve ma problem?
by unknown on Sep 22, 2010 at 11:36pm Add comment
please give solution for e2 and e7. thanks before
by unknown on Oct 20, 2010 at 7:31pm Add comment
odofemfmflfl;
by soe thet naung on Dec 24, 2010 at 1:25am Add comment
Thankssssss.....
by unknown on Jun 4, 2012 at 7:40pm Add comment
printer are shown on display only E5. Not any work this printer.
by unknown on Jul 17, 2012 at 7:10pm Add comment
for e28 error, how i want to solve it?
by unknown on Jul 3, 2013 at 8:53am Add comment
hi, i follow the step, but still can't work ?
by unknown on Nov 16, 2013 at 11:43pm Add comment
Error showing E5, but scanner also not working... :-(
by unknown on Nov 12, 2014 at 9:17am Add comment
Here the reset procedure to reset waste ink counter on Canon Pixma MP145 :

1) Connect the Printer to a Power source, Turn off the printer if printer on.

2) With the Printer power off, press the Power button while pressing and holding Stop/Reset button.

3) When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.

4) After releasing the Power button and the Stop/Reset button (regardless of order), the printer will move into a service mode (Showing ‘0’ on display). (Waiting for menu selection)

5) Now press the Stop/Reset button four times to reset wase ink counter. For other specified number pressed function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange).

6) Press the Power button twice.

7) All done, Now turn off the printer and it will be ready after turning on.


##The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
by unknown on Feb 19, 2015 at 2:44am Add comment