anandgyanbote

asked Apr 1, 2009 at 11:14pm
Samsung Samsung SCX 1100

Reset page count for Samsung ML-1640

i m having SAMSUNG ML-1640 .it stopped at 2100 pages .
in smart panel it gives message TONER EXAUSTED PLEASE HELP

please provide picture for reseting the page count .and specify clearly which pins should i short .when pin is shorted what to do
should i turn on printer .or should i turn my computer please provide step by step

thanxxxxxxxx.........

can i short pins if count is at 776 pages or above 1100 pages
download the flasher here http://www.4shared.com/file/149520536/3cc409b4/ML-1640_V1010066.html
believe me it's WORK


BEFORE

RAM SIze : 8 Mbytes
Total Page Count : 708
OS Version : 1.01.00.78 09-30-2008
Engine Version : 1.00.49
SPL Version : 5.07 06-27-2006
USB S/N : xxxxxxxxxxxxxxxxxxxxxxxxx
Service Date : 2010-1-7
Toner Pege Count / Toner Remaining / Toner Status :
708 / 0\% / Replace Toner
(initial Toner Page Count : 708)
Catridge Capacity : 0.7 K
Dot / OPC Count : 1316992700 / 5702
Catrdige S/N : Not Support
Supplier : Samsung (INI)
Man. Date : Not Support


AFTER

RAM SIze : 8 Mbytes
Total Page Count : 0
OS Version : 1.01.00.66 03-28-2008
Engine Version : 1.00.44
SPL Version : 5.07 06-27-2006
USB S/N : xxxxxxxxxxxxxxxxxxxxxxxxx
Service Date : YYYYMMDD
Toner Pege Count / Toner Remaining / Toner Status :
0 / 100\% / Normal
(initial Toner Page Count : 0)
Catridge Capacity : 0.7 K
Dot / OPC Count : 0 / 0
Catrdige S/N : Not Support
Supplier : Samsung (INI)
Man. Date : Not Support
by unknown on Jan 30, 2010 at 8:23am Add comment
THIS SOLVED MY PROBLEM!!!!! WORKS GREAT!!!!
Thank you yamin - indonesia.


:)) - Anonymous
Hi Yamin, I read your posting for resetting the counter on the Samsung ML-1640 printer, I downloaded the files you showed (I havent a CLUE how I got this to work, because I am a TOTAL DUNCE with computers) Anyway I downloaded the files and it says to "drag" one of the files on top of the other, my computer said it couldnt "open" the files and recommended "unzipping" them, I did this and then it still wouldnt "open" the files, but I did "drag" one of the files on to the top of the other and then the green light went Orange on the printer and I thought "Oh God, what have I done??!!! and then I turned off the printer and turned it on again and it showed the light as green and the red flashing light went out. I had already refilled the toner cartridge so I knew it was totally full, even though the test page was only showing 480 prints and 8\% toner, anway on turning the printer on again and the green light on, I did the test page and it showed ZERO prints and toner -100\% - So it must have worked!! Oh what a relief it is to have people who can solve these problems, as when one is alone and does not know what to do it is a NIGHTMARE!!! thanks for your post, I will copy and paste it to my documents folder in case I have to use it again. Will I have to do this each time I refill the toner cartridge?? thanks PCDUNCE - unknown
Thanks a lot. It works fine. Page count cleared and the printer is working fine.
Once again, thanks a lot. - unknown
Thanks a lot. It works fine. Page count cleared and the printer is working fine.
Once again, thanks a lot. - unknown
I HAVE TRIED THE LINK BUT THE FILE WAS DELETED BY SAMSUNG
CAN U PLEASE SEND ME THE FILE
- atrang1968
by unknown on Apr 19, 2009 at 1:43pm Add comment
sumsung ml 1640 toner reset - Anonymous
please I want to know why can to do reset page count samsung ML-1640 - jbeli hassen
help me !
by unknown on May 3, 2009 at 1:37am Add comment
http://path-of-power.com - nirmalyasaha
you need buy a new cartridge or a reset chip. Reset chip is cheaper and you still used your old cartridge.
I'm having that printer now. I hate it!!! >_<
by unknown on May 3, 2009 at 8:09pm Add comment
To Cimm;

Is there an English version of the link you gave above?
thx.


http://www.ots45.ru/support/samsung1640.html

I need English version of this page...
by jack71 on May 8, 2009 at 5:36am Add comment
Hi all, i found this document http://www.arbikas.com/forum/Attachments/ML1640_reset.pdf i think it gives the same explanation as the russian site. You have to shorten the 2 pins of the chip inside the printer and you'll never find the need of a reset chip in the toner cartridge :). I'm about to try it - Anonymous
plese help 1640 tonner problem
by Anonymous on May 20, 2009 at 9:10am Add comment
hello, I have the printer with the 93C66 chip, can someone tell me if that is the same method to reset?
by unknown on May 22, 2009 at 1:36am Add comment
Dear Friend,

Pls. Try to do this .....


"Happy DIPAWALI"


Samsung ML-1640/1641/1645/2240/2241 MLT-D108S: refuelling of starting cartridges, zeroing of counters:
Recently manufacturers of office equipment in every possible way try to protect the cartridges from possibility of their refuelling. In particular already about half a year as there were printers Samsung ML 1640/1641/1645 at which a starting cartridge with a piece of iron instead of the chip. Having bought the cheap printer after a while, users face the first troubles: approximately through 1000 printed pages the red indicator warning starts to blink that the toner in a cartridge will soon end, through 1000 pages this indicator ceases to blink and burns already constantly, blocking work of the printer and, thus, the user is offered to replace a cartridge with the new. Certainly, each time to buy a new cartridge is it is unprofitable. In service - the centres at present refuelling of these cartridges for the present is basically at an experiment stage. But on a question: whether It is possible to use somehow a starting cartridge repeatedly, having filled with its inexpensive toner? - Already there is an affirmative answer.

Anyway, at us already on three printers Samsung ML-1640 it has turned out, and it already statistics. If you are ready to risk, it is possible to try to dump counters on a printer payment, in its back part if it is final for you the general counter of the printed pages is not important. But, consider that thus you will lose possibility of guarantee repair in service-tsentre. And still it is necessary to put completely risk the printer out of action since manufacturers, letting out the production, in the course of manufacture gradually make various changes, including to electronics structure.

And so, you have filled a starting cartridge with a toner, and the red indicator of a toner continues to burn and the printer does not wish to print. That he has earned it is necessary to dump counters in EEPROM 93Ñ66.
For this purpose:

1. On the switched off printer remove a back cover (having turned away two screws).
2. On a smaller electronic payment, that which on the right (the photo see) find a microcircuit 93Ñ66.
3. Find on it 3rd and 4th legs. On a key numbering of legs goes counter-clockwise if to look from above. 1st leg of a microcircuit 93C66 is In the given model of the printer on the right below. Means upwards from it - 2nd, 3rd and 4th.
4. Further, a metal subject close legs 3 and 4.
5. Include the printer, leaving closed 3rd and 4th legs of the given microcircuit, thus indicators of the control panel of the printer will light up and will go out.
6. After they have gone out, wait still approximately hardly less seconds and open legs, counters will thus be nulled. At once it can not turn out. It is necessary to try some times, varying time before disconnection of legs of a microcircuit.
7. After self-testing the printer leaves in readiness and the red indicator of absence of a toner does not light up. It is possible to work!


There is still a second variant how to bypass a problem of blocking of printer Samsung ML1640/1641/1645 on a toner, but it is necessary for making on the new printer still before the toner indicator will start to blink red.

Regards

Ravikant

- Anonymous
Hi my name is sumesh,, I have ML-1640 samsung printer,, still its stop 2100 pages its shows some error msg like toner exhausted pls help me how to reset that one,,


Any one know answer mail me [email protected]
by sumesh on Jun 18, 2009 at 8:31am Add comment
Hi im chris of epins corp. technical i would to know if the resetting of russian version is should be the answer for the resetting of cartridge.. Because we need to use are printer right a way.. We need to fix our own printer to be come enhance in trouble shooting with are printer....

Thanks for your information to provide are problem in resetting printer...
by epins corp on Jul 21, 2009 at 1:18am Add comment
plssss....
give me some idea to fix my printer....
i really need it

Tanx for helping me....
by epins corp on Jul 22, 2009 at 3:20am Add comment
Hey guys...

http://www.arbikas.com/forum/Attachments/ML1640_reset.pdf

does this link really works...if someone has suceed pls reply i need to try tonight.
by jintuabraham on Aug 19, 2009 at 7:20am Add comment
HAPPY NEWS GUYS........
FIRST OF ALL...THANKS TO CIMM....AND THE REST OF ALL.....
THIS LINK WORKED REALLY NICE..
http://www.arbikas.com/forum/Attachments/ML1640_reset.pdf

I just brought this printer a few months ago and I was shocked that it stopped at 2100....I then took this risk..and thought to try it...connected the first and fourth leg...Now its working fine and reset to 0 Page...thanks again...

Note: this is my fourth refill...works fine...
by jintuabraham on Aug 19, 2009 at 8:44am Add comment
I have same problem with my Samsung ML 1640. I have tried this solution http://www.arbikas.com/forum/Attachments/ML1640_reset.pdf but it does not seem to solve my print's toner exhausted msg. I connected pins in accordance to the pic and the russian website http://www.ots45.ru/support/samsung1640.html (Of course i use google translate, and i disconnect the pins several seconds after i plug my print). The result have disappointed me. My print works some time and i can print some documents. But it shows toner exhausted for most times.
I am going to buy a resetted chip and this maybe the only solution.
by Anonymous on Sep 12, 2009 at 6:51am Add comment
"I think if you want to use a replacement cartridge, you have to disconnect CN5 and short out CN9.
This way the toner will always be treated as the initial cartridge."

What does the above message mean? Which pin is CN5 and which pin is CN9? The whole chip only has 8 pins! And what does it mean to "short out" CN9?
by unknown on Oct 4, 2009 at 2:00am Add comment
how to reset ml-1460 toner cartige
by Anonymous on Nov 9, 2009 at 10:12pm Add comment
downgradeing / upgradeing the bios fixes that problem. when the printer stops press the button (on the printer) until led flashs.
you can see the bios version as the OS version on the printed page.if no newer bios version is not present. you can down grade the bios using older version.
by Anonymous on Dec 9, 2009 at 8:38am Add comment
3 and4 pind together and counter is 000000 :)
by Anonymous on Jan 13, 2010 at 11:10am Add comment
dear sir
i have purchased samsung printer ml-1640 from date of september-09 and i have all ready joint to pin as i have a seen image... but did not working and i cant be using this printer... this printer cant to be edited your dealer. also i cant do it reseling this printer... I really disappontment this printer.... some people talk to me when i met for edit this printer, this product from newly edited from company 2009 product so when i am joining 2 pins there did not work printer.
plese help me ealry...
by unknown on Jan 18, 2010 at 11:37pm Add comment
nothing to need short pins i have reset software i can give it to you give me your mail id
by prafful on Jan 21, 2010 at 8:20am Add comment
Hi,
I need the samsung toner RESET software,
kindly send my mail. bye - Anonymous
hello sir,
i am using samsung ML-1640 from last two months & refilled for two times but now the error is "Toner exhausted/Replace Toner" so pl guide me. - Anonymous
pls help me reset my ml1640. - Anonymous
Sir, i need this software please forward me, i may pay 4 u - Anonymous
my email address is anil_mahawar@hotmail. will u please send me the software for samsung ml 1640 chip reset. - unknown
Dear Sir,
Please send the software to my mail id, it ll be more help ful to me.......... - unknown
please send me the reset software of samsung 1640, my printer stop printing and i badly need that software.


thanks,
rajarshi dutta
[email protected] - unknown
to Praful
i want the resetting software if it is available with you.
please respond so that i may give u my email id - rajatkumar
by prafful on Jan 21, 2010 at 9:40am Add comment
http://praffulthakare.blogspot.com/ just download from this blog
by prafful on Jan 26, 2010 at 6:22am Add comment
Hi Prafulla,

Pl mail me a software to reset count for toner of Samsung ML-1640 printer - Anonymous
Hi,

I have a samsung ml 1640 laser printer , but it had error indicate that "toner exhaused /replaced "
How to reset toner exhaused/replaced message pls! Help me
by unknown on Jan 29, 2010 at 9:14pm Add comment
thankes
by unknown on Jan 31, 2010 at 10:28am Add comment
I love you - unknown
Thanks all you for posts!
I reset ML-1640_V1.01.00.66 with this flasher. And works fine with starter cartrige, but if i buy a new cartrige (have chip inside) and then i still use flasher and reset bios and still print? Or i need short pins, when i replace new one cartrige?

Thank you!
by unknown on Feb 1, 2010 at 1:34pm Add comment
Thx to alll
I hav reset my Ml1640
thx again
bilal
by Anonymous on Feb 2, 2010 at 7:42am Add comment
thanks a million
by Anonymous on Feb 2, 2010 at 2:51pm Add comment
i m having SAMSUNG ML-1640 .it stopped at 2100 pages .
in smart panel it gives message TONER EXAUSTED PLEASE HELP

please provide picture for reseting the page count .and specify clearly which pins should i short .when pin is shorted what to do
should i turn on printer .or should i turn my computer please provide step by step

thanxxxxxxxx.........

can i short pins if count is at 776 pages or above 1100 pages
by Anonymous on Feb 8, 2010 at 6:03am Add comment
First to all many tanks for you helps

Sorry, but a have bad news. Today i flash ML-1640 with
V.1.01.00.91 ( October 2009 ). And flash don't works. May be with this version flash not work more.

PD: Sorry, english not is me original languaje.

Best Regards.
by Anonymous on Feb 16, 2010 at 6:27pm Add comment
sir please help for restting
by unknown on Feb 17, 2010 at 11:30pm Add comment
please help forReset page count for Samsung ML-1640
by unknown on Feb 19, 2010 at 2:47am Add comment
Hi,

I have a samsung ml 1640 laser printer , but it had error indicate that "toner exhaused /replaced "
How to reset toner exhaused/replaced message pls! Help me
by Anonymous on Mar 3, 2010 at 1:18am Add comment
have a samsung ml 2240 laser printer , but it had error indicate that "toner exhaused /replaced "
How to reset toner exhaused/replaced message pls! Help me
by Anonymous on Mar 3, 2010 at 4:11am Add comment
by Anonymous on Mar 3, 2010 at 11:44am Add comment
thanks to yamin - indonesia
for giving me this most help full tool For most stupid printer ML 1640 witch i perched. if u r thinking to buy a printer dont remember
samsang ML 1640.
by unknown on Mar 13, 2010 at 12:36am Add comment
Here's a link to reset samsung ml 2240

http://www.4shared.com

All you need to do download the file, unzip it to a folder on your desktop, turn off the printer, go into the folder, run the ms-dos batch file, turn your printer back on and it will be reset!

The motto of this story - don't buy Samsung again!
by unknown on Mar 17, 2010 at 5:53am Add comment
For new versions, upgrading f/w does not work!
by jack71 on Mar 17, 2010 at 6:41am Add comment
Newly Menufecringe for 2009 -2010 Solution Regardes
by Anonymous on Mar 28, 2010 at 6:13am Add comment
pin 1 & 4
or
pin 3 & 4 work great!
by unknown on Mar 29, 2010 at 3:59am Add comment
Dear sir

Thanks for nice support.you done very good solution hear.

Thanks N Regard

Mudassar Ali
Jodhpur India - Anonymous
thanks to anonymous for great help..
thanks alot
by unknown on Apr 2, 2010 at 4:44am Add comment
sir/madam,

I have samsung ML-1640 printer have problem of tonner exahust
please provide the best sollution

sharanu
by unknown on Apr 2, 2010 at 11:17pm Add comment
Plz Send Me Samsung ml1640 rest toner.Urgent





Thanks
Kishor
by Anonymous on Apr 3, 2010 at 9:37pm Add comment
by Anonymous on Apr 11, 2010 at 10:54pm Add comment
I have samsung ML-1640 printer have problem of tonner exahust
please provide the best sollution

by unknown on Apr 13, 2010 at 4:41am Add comment
Buy a new cartridge, problem solved.
by philly5706 on Apr 13, 2010 at 12:14pm Add comment
I have samsung ML-1640 printer have problem of tonner exahust
please provide the best sollution

by unknown on Apr 15, 2010 at 7:31am Add comment
i m having SAMSUNG ML-1640 .it stopped at 2100 pages .
in smart panel it gives message TONER EXAUSTED PLEASE HELP
by Anonymous on Apr 21, 2010 at 3:20am Add comment
How did u solve the problem with the f/w file??i tried it but i couldn't run the file. tell me the detail,please. thank you [email protected] - Anonymous
samsung ml1640 new version frameware given below
os version 1.01.00.91 09-25-2009
engine ver 1.10.50
SPL ver 5.07 06-27-2006
how to reset page counter i try to short out pin 1 and 4 of memory ic but counter not reset
please help me

by unknown on Apr 21, 2010 at 6:45am Add comment
hi
its 3 and 4 u have to shot - Anonymous
Why do you want to reset the page count?
by philly5706 on Apr 21, 2010 at 3:34pm Add comment
hi
its 3 and 4 u have to shot
by Anonymous on Apr 22, 2010 at 10:35pm Add comment
I also have this Idiot Printer ML 1640, the Maker of this printer must be a real stupid.

Please help me on fallowing issues.
where is ML1640_V1010060.fls locaed.
i though have downloaded usbprns.exe from internet.

the second solution was to short the 1st and 4th pin of EEPROM 93Ñ66. but unfortunately i was unable to locate this IC On the PCB.
Please someone help me to locate this IC with the help of a picture of the printed circuit board

i really need your help please.
by unknown on Apr 29, 2010 at 6:23am Add comment
http://praffulthakare.blogspot.com/ u can download ML1640_V1010060.fls from here
by Anonymous on Apr 29, 2010 at 10:07am Add comment
i have a samsung ml-1640 laser printer using in our cyber cafe.
print is very good , good performance......but maximum output 750-850 copies only....not 1000 copies.
ink refill charge in trivandrum is 400/-
ink recharger said..to remove present toner and add new high capacity toner, and get more above 2000 copiesin single toner...that is all
by unknown on May 1, 2010 at 11:27pm Add comment
you want to just download reset software you can get it here
www.praffulthakare.blogspot.com
if you got any problem with reseting you can mail me on [email protected] - prafful
you want to just download reset software you can get it here
www.praffulthakare.blogspot.com
if you got any problem with reseting you can mail me on [email protected] - prafful
help me...give details of page counter checking & ink level of samsung ml-1640 printer
ROBIN PIOUS
TRIVANDRUM
[email protected]
by unknown on May 1, 2010 at 11:29pm Add comment
you want to press the big button of printer for 2 minutes then printer prints self test page on which you can find page counter & ink level of samsung ml-1640 printer
if you want reset software see my blog
www.praffulthakare.blogspot.com - prafful
I used the firmware update & it worked like Magic.


Thanks
by unknown on May 2, 2010 at 12:53am Add comment
I purched samsung ml 1640 printer after it print 2100 prints. it can stop the working so please help me for this problem.
by unknown on May 5, 2010 at 9:36am Add comment
after short 1st and 4th pin i got message invalid toner cartridge.


help me.................
pleaseee
by unknown on May 6, 2010 at 9:13pm Add comment
1- Send it to who? Anonymous???
2- When asking strangers for help, it's customary to say 'please'
by philly5706 on May 10, 2010 at 4:04pm Add comment
software and chip are now available for the new ml1640 ml2240 with the 90 firmware no need to short out pins
by mainstcomp on May 11, 2010 at 12:42am Add comment
software and chip are now available for the new ml1640 ml2240 with the 90 firmware no need to short out pins
by mainstcomp on May 11, 2010 at 12:44am Add comment
Dear Sir
Hope everything goes well with you and your business
This is Carina comes from Acro colorful technology company,we are specializing in developing,manufacturing and selling toner chips,our products are hot selling all over the world due to their reliable quality and our more and more mature and perfect technology,trust we can satisfy your demand
Sincerely hope we can have a chance to cooperate with you
Your sincerely
Ms Carina
by Anonymous on May 24, 2010 at 9:37pm Add comment
So how is somebody supposed to contact you?
by philly5706 on May 24, 2010 at 10:33pm Add comment
you can send me information by [email protected] - Anonymous
I used the f/w to reset, now count is reset but new problem started, whenever print is given then supply of inverter trip, happens every time.

Pleaseeeeeeeeeeee............ suggest liquid (Solution)
by unknown on May 25, 2010 at 2:15am Add comment
I have tried is this http://www.4shared.com/file/149520536/3cc409b4/ML-1640_V1010066.html bet man niekaip nepavyksta padaryti Help me please
by Anonymous on May 31, 2010 at 12:56am Add comment
Me f/w is 93 (ML1640) What should I do?
by Anonymous on May 31, 2010 at 12:59am Add comment
befor short 1st and 4th pin:

Ram Size : 8 Mbytes
---->Total Page Count : 2099<-----
os Version : 1.01.00.83 04-08-2009
Engine Version : 1.00.50
SPL Version : 5.07 06-27-2006
USB SiN : 146RBKAS400915F.
Service Date : 2010-1-5
Toner Page Count/Toner Remaining/Toner Status : 2101 /0(\%) / Toner Exhausted (Initial Toner Page Count : 2101)
Cartridge Capacity : Not Support
Dot/OPC Count : Not Support / Not Support
Cartridge SiN : Not Support
Supplier : Toner Exhausted
Manufacturing Date : Not Support

and after short 1st and 4th pin:

Ram Size : 8 Mbytes
---->Total Page Count : 1<-----
os Version : 1.01.00.83 04-08-2009
Engine Version : 1.00.50
SPL Version : 5.07 06-27-2006
USB SiN : 146RBKAS400915F.
Service Date : 2010-1-5
Toner Page Count/Toner Remaining/Toner Status : 2103 /0(\%) / Toner Exhausted (Initial Toner Page Count : 2103)
Cartridge Capacity : Not Support
Dot/OPC Count : Not Support / Not Support
Cartridge SiN : Not Support
Supplier : Toner Exhausted
Manufacturing Date : Not Support

jast line 2 changed, but i cant print by computer and paper light not change to green, it is red and when i put paper in printer casset it turn off.
please help me.
also i cant reset by software.
by mahdi_a82 on Jun 19, 2010 at 2:11am Add comment
Mine is

Ram Size : 8 Mbytes
---->Total Page Count : 1950<-----
os Version : 1.01.00.83f 04-08-2009
Engine Version : 1.00.50
SPL Version : 5.07 06-27-2006
USB SiN : 3513BAHS502874A
Service Date : 2009-8-8
Toner Page Count/Toner Remaining/Toner Status : 4 /100(\%) / Toner Exhausted (Initial Toner Page Count : 4)
Cartridge Capacity : 1.5K
Dot/OPC Count : 3486050/29
Cartridge SiN : Not Support
Supplier : SAMSUNG (INI)
Manufacturing Date : Not Support

After I use resetting program. Now I'm so worry because only 50 pages left who can tell me . After Total Page Count 2000 my printer won't lock right? Because Initial Toner Page Count : 4 but Total Page Count doesn't change who please tell me? Thanks

by juth on Jul 10, 2010 at 9:39am Add comment
The Samsung ML 1640 printer uses the mlt-d1082s toner cartridge, which can only print an estimated 1500 pages so a refill is more than welcome. You will need toner and a new chip. There are chips available from manufacturers such as Sky and others. You can also build a strap on the 93C66 memory between pins 1 and 4 but it won`t work forever.
by unknown on Jul 23, 2010 at 1:11am Add comment
My current OS version is 1.01.00.69 04-14-2008. I am still using my starter cartridge.

If I use yamin's method to reset the printer will it, the printer, work for the refill and subsequent refills or do I have to do something else?
by unknown on Aug 31, 2010 at 1:03am Add comment
I have refilled my cartridge without doing any modification etc and it worked. The only thing is that now it's not printing well, does it have anything to do with the chip or reset counter? it printed well for sometime but now the black is not that black anymore and print seems a whitened clear fotocopy.
by unknown on Sep 7, 2010 at 9:08am Add comment
cant reset page counter for samsung ml 2240
by unknown on Sep 7, 2010 at 9:47pm Add comment
thanks for that reseting file........
by rajeshnk_raj on Sep 30, 2010 at 9:44pm Add comment
My printer reports:

Toner page count/toner remaing/toner status: Not supports/Not supports/Not support
(Innitial Capacity Page Count: Not support )
Dot/OPC Count : Not supports
Cartridge S?N: Not supports
Supplier : Invalid Toner
Manufacturing Date: Not supports

I tried to use reset software, but nothing changed!

I bought a new cartride, nothing change again!

Please help
by unknown on Oct 14, 2010 at 1:30am Add comment
Hi all,

I have same problem. Used my cartridge without chip and it worked. But I made a mistake, update firmware to v96, and it not works. How can I solve this problem, please help me.
Thanks,

maistroo
by unknown on Oct 17, 2010 at 10:42am Add comment
hey guys this is only solution through software


http://www.megaupload.com/?d=HZO6CT90
by unknown on Oct 20, 2010 at 10:08pm Add comment
many thank for you from Tunisia revolution
- winner3773
Thanks krisna, but it's older than v96. it is v93 firmware. :(
by unknown on Oct 21, 2010 at 7:11am Add comment
Any reset for latest firmware v .96???

pls. e-mail me: [email protected]

thanks
by unknown on Oct 25, 2010 at 11:25am Add comment
u had try that url or not, if i find v93 i'll post
by krishna_mishra42 on Oct 26, 2010 at 6:09am Add comment
yep i have; but it's only v93 and i need v96.

thx :) - unknown
I need v93. been looking for ages but most sites have removed links for fear of prosecution i think. Haven't seen v96 about . If I do i"ll let you know.Any chance you can pass on v93 to me.
thanks
Peter
by guvet on Oct 29, 2010 at 12:18am Add comment
Hi Andy

Any joy with solution for ML-2240/ML-1640 running v.96 firmware? I am having the same problem. Is anyone working on a new version of the software?
by Brian Napier on Nov 30, 2010 at 4:01am Add comment
Finally working solution for v96:
go to: http://www.fixme.ro

create an account for free and download the firmware v96 fix. Works, just happy :)
by unknown on Jan 8, 2011 at 2:49am Add comment

PLEASE HELP ????????

My printer reports:

Ram Size : 8 Mbytes
---->Total Page Count : 2099<-----
os Version : 1.01.00.83 04-08-2009
Engine Version : 1.00.50
SPL Version : 5.07 06-27-2006
USB SiN : 146RBKAS400915F.
Service Date : 2010-1-5
Toner Page Count/Toner Remaining/Toner Status : 2101 /0(\%) / Toner Exhausted (Initial Toner Page Count : 2101)
Cartridge Capacity : Not Support
Dot/OPC Count : Not Support / Not Support
Cartridge SiN : Not Support
Supplier : Toner Exhausted
Manufacturing Date : Not Support
by unknown on Jan 9, 2011 at 5:11am Add comment
my id is [email protected],
pls send the samsung software
by unknown on Jan 9, 2011 at 9:54pm Add comment
pls send Reset page count for Samsung ML-1640 printer
by unknown on Jan 13, 2011 at 8:50am Add comment
I'm a woman and I did this - joined points 3 and 4 on the circuit mentioned by way of a screwdriver with plastic handle .... had to do it a few times, but it's reset to zero and I avoided electrocution. Don't know how this worked, but it did... I'm happy.... till it stops working again!
by unknown on Feb 3, 2011 at 12:14pm Add comment
I'm a woman and I did this - joined points 3 and 4 on the circuit mentioned by way of a screwdriver with plastic handle .... had to do it a few times, but it's reset to zero and I avoided electrocution. Don't know how this worked, but it did... I'm happy.... till it stops working again!
by unknown on Feb 3, 2011 at 12:17pm Add comment
Please can you help me
by winner3773 on Feb 10, 2011 at 7:37am Add comment
samsung ml1640 new version frameware given below
os version 1.01.00.69 04-14-2008
engine ver 1.00.46
SPL ver 5.07 06-27-2006
how to reset page counter i try to short out pin 1 and 4 of memory ic but counter not reset
please help me
by unknown on Mar 22, 2011 at 4:40am Add comment
sir/madam,

I have samsung ML-1640 printer have problem of tonner exahust
please provide the best sollution
by unknown on Apr 15, 2011 at 11:29pm Add comment
Replace the toner cart. Voila! It's fixed.
by philly5706 on Apr 22, 2011 at 7:52pm Add comment
I have tried everything... every reseter you 've mentioned, but nothing worked!

My printer stil sais "Total page Count: 1956"

It's version 1.01.0093f 11-23-2009

The red light is not flashing, only the green is on, is there any hope that it will not stop printing al 2000pages?

Does anyone knows what can I do?
Pleaseeeeeeeeee help me!
I need to print a lot of stuf for my master-thesis...
Please...
by unknown on May 25, 2011 at 3:34am Add comment
please reset me ml-1640 page count
by unknown on Jun 2, 2011 at 9:10am Add comment
Please download this software and run

http://www.mediafire.com
by unknown on Sep 6, 2011 at 11:11pm Add comment
Thank for info....
Shortcircuit eeprom pins 1-4 it works.

Thanksssss!!!
by unknown on Oct 30, 2011 at 11:30am Add comment
Sir, i need this software please forward me, i may pay 4 u
by unknown on Nov 12, 2011 at 3:56am Add comment
i m having SAMSUNG ML-1640 .it stopped at 2100 pages .
in smart panel it gives message TONER EXAUSTED PLEASE HELP
by unknown on Jan 21, 2012 at 8:48pm Add comment
I used the solution provided by yamin - indonesia and it works!

Had OS version 1.29.00.84 (after patch 1.01.00.66)
Engine version 1.00.50 (now 1.00.44)
by unknown on Feb 5, 2012 at 5:34am Add comment
i m having SAMSUNG ML-1640 .it stopped at 790 pages .
initial toner page count : 791
dot/opc count : 1609138180/5413
engine ver : 1.00.50
i have refilled it full.

i cant reset count or print any copy.
the red light blink...............
by unknown on Feb 10, 2012 at 8:50pm Add comment
I need firmware update soft. for samsung ml1640 printer
for reset paper counter. Pls help me....
by unknown on Feb 13, 2012 at 1:22am Add comment
after rese samsung ml-1640 not conetct with any pc
how am i sovle this problem ?
by unknown on May 31, 2012 at 10:38pm Add comment
** My original printer firmware was 1.01.00.91 (Toner was Exhausted)

** Could not downgrade to older firmware, bcos firmware newer than 1.01.00.83 doen't allowed it (so, shorting pins 1 & 4 (or 2&3) could not help me)

** Now ( the good news), i have upgraded to 1.01.0093f (patch version) and..
Total Page Count/Toner remaining/Toner Status: 0/100(\%)/Normal....(Its sooo beautiful..no more toner exhausted...i can print it now...Buttttt)...

*** the printed output is WEIRD..fonts are too big...doesn't fit in A4 eventhough i have typed document in A4 paper size...and set output paper size to A4...it never print the whole text (some bottom part of the document is always missing)

*** Anyone facing this issue...and anyone know how to FIX it... Please HELP, i'll be very thankful to you...

*** i even upgrade it to 1.01.0096f ( NO LUCK...fonts are looking even bigger...do not show all the texts on the printed paper)

My system:-
Windows 7 Professional 32bit
Samsung Ml-1640 driver : 3.04.95:05 ( i guess it is the newest)
by Dexterfanai on Mar 27, 2013 at 10:27am Add comment
Took me about 10-15 tries, but I reset the page count by shortening 3 and 4 pins, as said in that russian site. My printer is Samsung ML-1640, engine version is 1.00.50 and it still works. 3 and 4 pins are, if you take the biggest chip as the top, the 3 and 4 pins are top right. They are data pins. So if you shorten them while turning printer on and release them on specific time it should reset the printer page count.

1. Turn the printer off (with the switch on the side)
2. Shorten pins 3 and 4 with some wire or something metalic (screwdriver didn't work for me, I used an aluminum pin)
3. Turn the printer on. The indicators blink for a second and turn off... after that you wait another 0,5-1 second and release the pins. let the printer load and look if it still shows toner indicator. If not - success, if it still shows, try again...

As I said, it took me about 10-15 tries, but it worked. :)
by unknown on Apr 23, 2014 at 2:40am Add comment
I bought this printer a few days ago (not a new one, it's used, but with the starter toner). I just checked for the new cartridges before I bought it, and they were quiet cheap. But now I see, that it's not so easy, because the cheaper ones doesn't have chips included. So I have read a lots of articles about it, but I still didn't get the point:

The printers data:
- OS Version: 1.29.00.84 05-13-2009
- Engine Version: 1.00.50
- SPL Version: 5.07 06-27-2006

So now I think, that shorten pins would work, to reset the counter, but I don't want it. I want to downgrade my firmware on it, and after that I could use cartridges without chips. Am I right?

So now the question is: Where can I download anything, which downgrades my printer? How should I do it?
After downgrading I can easily refill the current toner?

Please help me!
Thanks!
by makakk0 on Nov 19, 2014 at 12:59am Add comment
Finally I found it: http://www.mediafire.com - makakk0