|  Post to this thread Post a new message thread
 | WASTE INK ABSORBER FULL CANON PIXMA iP 1500 by COLIN ASHBY (11/12/08 6:32 AM) reply | + / - | Can anyone advise me how to get my printer functioning again please?
|
| Re: WASTE INK ABSORBER FULL CANON PIXMA iP 1500 by Anonymous (11/12/08 7:50 PM) reply | + / - | yes - replace it. that model is like the lowest most budget Canon inkjet there is and im pretty certain for that reason there are no spare parts avalable anyway.
replace it.
Rohan
Australia
|
 | Re: Re: WASTE INK ABSORBER FULL CANON PIXMA iP 1500 by Anonymous (11/13/08 2:56 AM) reply | + / - | Thanks for reply. I have got printer working again by turning off AC supply, then holding down power button as I reconnected AC supply. It may only be a stop gap and by placing a tray under printer if ink does leak out then my desk is protected and I will buy another. Colin
|
 | Re: Counter ResetWASTE INK ABSORB FULL CANON i250 by anonymous (11/13/08 5:30 AM) reply | +1 + / - | How do i do a counter reset on Canon i250 please. I believe it will give me temporary use of my printer whilst I try to get replacement waste ink absorber, which wll hopefully solve problem altogther. thx.
|
| Re: WASTE INK ABSORBER FULL CANON PIXMA iP 1500 by Anonymous (1/31/09 12:48 PM) reply | + / - | I have just fixed my Canon Pixma iP 1500! I figured I had nothing to lose by trying. I disconnected it and tripped the mechanism that allows the ink cartridges to move over. At this point I could see two small rectangular pads. Very carefully, I pried each out, cleaned them and cleaned around the area with Q-tips. I placed the two pads back in, held down the power button and reconnected the power. Try it - you have nothing to lose!
|
Post to this thread:
| |
