|  Post to this thread Post a new message thread
 | HP OfficeJet K60 - won't print by rheagl (11/14/07 2:09 PM) reply | + / - | From both Windows XP and Mac OSX Tiger, the output goes to the spoolers and shows to be "Printing" then just goes away - nothing comes out of the printer. It will also go through the motions of receiving faxes, but does not print them either.
The printer makes copies, faxes and scans with no problem. It was working fine on the XP until about a month ago.
I have cleared the hard drive and reinstalled XP since I started having this problem. I have reloaded drivers for both computers and for both K60 and K60xi.
Both computers connect directly to the printer via USB (not at the same time) and I have confirmed the DOT setting on the XP. I have unplugged the K60 and power reset. I have reset defaults via the K60 menu.
What have I missed?
|
 | Re: HP OfficeJet K60 - won't print by Bert  (11/14/07 4:01 PM) reply | +1 + / - | If you are using the driver that came with XP, I suggest downloading HP's newest driver. It supports both parallel and USB. Take close note of the instructions on the download page.
http://h10025.www1.hp.com
|
| Re: HP OfficeJet K60 - won't print by rheagl (11/15/07 4:55 PM) reply | + / - | Installed new driver, but same results. It goes through the motion, but nothing comes out.
|
| Re: HP OfficeJet K60 - won't print by Bert (11/15/07 6:54 PM) reply | +1 + / - | Try using the parallel port.
|
| Re: HP OfficeJet K60 - won't print by rheagl (11/16/07 12:10 PM) reply | + / - | I don't have any way to hook up to the parallel port. Also, it worked fine over a year on the USB port.
I just swapped the USB cable and it did not help.
|
Post to this thread:
| |
