Hi there. Can anybody please help me. I've got a HP Photosmart 2613 all-in-one printer wich gives me the following error on the little screen when I switch it on: ox886a69f6. Please if any body can help me it would be apprecheated. reinhardt@moriti.co.za
Re: photosmart 2613 all-in-one error by Stephen (1/30/07 4:43 PM) reply
I've just got a HP Photosmart 2610 in with the same fault - power up and after a minute or so all the lights flash and error 0x886a69f6 and some Chinese looking writing underneath appears. There's no activity of the printer or the scanner.
Looking around I found a Chinese website that seems to suggest the error indicates a serious, essentially fatal hardware failure - possibly the modem/fax chip set or something similar (this one have have apparently couldn't be seen over the USB connection).
Hi, I have the same problem as you indicated. Could you please tell me what was the solution to the problem? I would appreciate your help. Thanks Ron Wolfson, Wolfson.ron@gmail.com
Hi there. Can anybody please help me. I've got a HP Photosmart 2613 all-in-one printer which I power up and after a minute or so all the lights flash and error 0x886a69f6 and some Chinese looking writing underneath appears. Please if anybody can help me it would be apprecheated. Thanks, Ron Wolfson, Wolfson.ron@gmail.com
Post to this thread Post a new message thread
