Stormin

asked Aug 9, 2006 at 9:00am
Hp HP Color LaserJet 4650

HP 4650 13.02.00,13.03.00,13.05.00 paper jam

I have a problem with paper jams in a HP 4650. The above error messges apply. Most of the time the paper stops on the ITB (tranfer belt) and then the error message appears. I have cleaned the pick up rollers and cleaned the exit sensors. Could someone please give me some insight into possible causes?
hi some one has snapped the deflecter flap on the pickup assembly, pull the paper tray out and look up were the paper feeds through, you will see some black guides, i would say they have been broken on one side, i will get the part numbers for you, they are not the same as the 4600,
by shotgun on Aug 9, 2006 at 10:14am Add comment
when i print from the manual feed its ok to print then we send the print from the casset 2 it will be jamed and message appear on the main manue of the priter (13.02.00.paper jamed.)
plz help me what is the problem and how can i solved this problem.
Thanks - Anonymous
hp4650 pickup assy part number is rg5-7453
and hp4600 pickup assy part number is rg5-6468,

remove fuser, remove top door, remove top cover, remove rear cover,remover left side panel,remove dc controller cover, now remove itb belt and toners,then you will see two screws holding the pickup assy in place at the front, remove screws and lift pickup assy up and forward, thenyou will see the connection to the dc controller, remove and lift out, any problems, post back i will try to help,
by shotgun on Aug 9, 2006 at 10:36am Add comment
Shotgun. Thanks for the post. I checked the pickup assy. There were no broken parts. Do you have any other idea?
- Stormin
Shotgun. Thanks for the post. I checked the pickup assy. There were no broken parts. Do you have any other idea?
- Stormin
if the paper is reaching the transfer belt, the pickup assy is ok.when you open/close the front door check if the toner flaps are opening,if they are not, then that may be the problem.
by laserphil on Aug 25, 2006 at 12:16am Add comment
I am having the same problem, and no the toner flaps are not opening when the door closes. What is this a sign of? I noticed the users changed the majority of the cartridges not too long ago. - Anonymous