|  Post to this thread Post a new message thread
 | HP IIIP Output paper jam by Tim Dunigan (1/5/03 11:12 AM) reply | + / - | I replaced the output roller assembly with a kit from here, the paper still accordians on output, but the bypass works fine. Help!
|
 | Re: HP IIIP Output paper jam by moe  (1/5/03 2:08 PM) reply | + / - | That's impossible. Never seen new rollers not fix the problem. How far is the paper getting out of the top?
|
 | Re: HP IIIP Output paper jam by Tim (1/6/03 6:09 AM) reply | + / - | Moe:
It just barely gets in the rollers and it begins crinkling up. I have to turn off the printer for fear of breaking something.
Tim
|
| Re: HP IIIP Output paper jam by chris (1/6/03 8:39 AM) reply | + / - | broken gear that drives the output rollers??? (not part of that assembly)
chris
|
| Re: HP IIIP Output paper jam by Tim Dunigan (1/6/03 7:45 PM) reply | + / - | If so, then wouldn't it jam before the bypass?
|
 | Re: HP IIIP Output paper jam by Tim Dunigan (1/7/03 6:41 PM) reply | + / - | Thanks Moe and Chris. Moe was right. It was repaired, the gear pin had dropped out. Replaced, works fine. You guys are number 1!
Tim
|
Post to this thread:
| |
