Brother HL 1440 main pcb

	Brother HL 1440 main pcb by jblazar (11/7/09 2:25 PM) reply	+ / -
Hi. I dropped something on the USB cord and it pulled one side of the contact for the USB receptacle loose from the main PCB. I took it apart and resoldered the USB receptacle back onto the board. It looks and feels solid, but when I put everything back together, I have the same problem--nothing prints. Any ideas? Should I replace the board? It will probably cost more than the printer, but I hate to give up this printer, as it works well. Thanks. Bill

	Re: Brother HL 1440 main pcb by seriously (11/7/09 2:58 PM) reply	+ / -
looks and feels solid doesn't mean it's good electrically :) have you measured continuity for all the 4 pins yet?

Post to this thread:

User:
Email:
	Notify me if someone responds
Icon:
Subject:
Message: