|  Post to this thread Post a new message thread
 | hp 9000 printer scanner issue code 30.1.13 by BANTU (1/9/06 10:36 PM) reply | + / - | I HAVE RECIVE AN ERROR IN MY HP 9000 MFP PRINTER THAT 30.1.13 SCAN FAILURE.CAN SOEBUDY HELP.
REGARDS
VINAY SHARMA
|
 | Re: hp 9000 printer scanner issue code 30.1.13 by Anonymous (1/30/06 3:33 AM) reply | + / - | is it flashing first 30.1.12 and then goes to 30.1.13 ? if so, call HP support for tech help. // L
|
 | Re: hp 9000 printer scanner issue code 30.1.13 by saad (11/8/06 6:37 AM) reply | + / - |
Hi Bantu,
Did you resolve your problem? If yes, will you please post it as we're having the same issue.
Thanks.
|
| Re: hp 9000 printer scanner issue code 30.1.13 by Nuki255 (12/12/07 8:12 PM) reply | + / - | Im having that issue also. I can't call HP support because Im over in afghanistan. Anyone have an answer for this?
|
| Re: hp 9000 printer scanner issue code 30.1.13 by dmzcompute  (12/12/07 8:45 PM) reply | + / - | 30.1.13
SCAN FAILURE
Scanner ASIC error. 1. Turn the power off, unplug the
power cord. Plug in the power
cord, and turn the power on.
2. Reconnect connector J161 and
J162 on the flatbed inverter PCB,
and connector J205 on the SCB.
3. Reconnect connector J103 on
the SCB, J504 and J503 on the
flatbed intermediate PCB, J201
and J202 on the flatbed analog
processor PCB, and J601 on the
flatbed CCD driver PCB.
4. Reconnect connector J105 on
the SCB, J502 and J501 on the
flatbed intermediate PCB, J203
and J204 on the flatbed analog
processor PCB, and J602 on the
flatbed CCD driver PCB.
5. Replace the flatbed inverter
PCB (LJ 9000mfp/9000Lmfp
only).
6. Replace the flatbed lamp
assembly (LJ 9000mfp/9000Lmfp
only).
7. Replace the SCB.
8. Replace the flatbed optical
assembly.
|
| Re: Re: hp 9000 printer scanner issue code 30.1.13 by Anonymous (1/2/08 3:33 AM) reply | + / - | thanx man i have solved this problem with replacxing the sccaner assambly and flatbed assembly...thanx
|
| Re: hp 9000 printer scanner issue code 30.1.13 by Anonymous (2/21/09 12:12 AM) reply | + / - | I HAVE PROBLEM IN TO MY PRINTER CLJ-9500MFP THE NUMBER ERROR 30.1.13 SCAN FAILURE I READ THIS SLOVED BUT STALL PROBLEM IF YOU HAVE ANOTHER SULION SEND ME
|
| Re: hp 9000 printer scanner issue code 30.1.13 by rlindeman (6/3/09 10:57 AM) reply | + / - | Spent a long time replacing the flatbed optical ass'y, ADF optical ass'y, SCB... even more time doing power cycles, cold resets, and SCB upgrades. Nothing has fixed it, although it has gone from being a solid failure to an intermittent failure.
|
 | Re: hp 9000 printer scanner issue code 30.1.13 by msapk (7/25/09 3:29 AM) reply | + / - | 30.1.13
SCAN FAILURE
I was doing all below work but same Error please advice
Scanner ASIC error. 1. Turn the power off, unplug the
power cord. Plug in the power
cord, and turn the power on.
2. Reconnect connector J161 and
J162 on the flatbed inverter PCB,
and connector J205 on the SCB.
3. Reconnect connector J103 on
the SCB, J504 and J503 on the
flatbed intermediate PCB, J201
and J202 on the flatbed analog
processor PCB, and J601 on the
flatbed CCD driver PCB.
4. Reconnect connector J105 on
the SCB, J502 and J501 on the
flatbed intermediate PCB, J203
and J204 on the flatbed analog
processor PCB, and J602 on the
flatbed CCD driver PCB.
5. Replace the flatbed inverter
PCB (LJ 9000mfp/9000Lmfp
only).
6. Replace the flatbed lamp
assembly (LJ 9000mfp/9000Lmfp
only).
7. Replace the SCB.
8. Replace the flatbed optical
assembly.
|
Post to this thread:
| |
