Laserjet 6L Solid orange top LED

	Laserjet 6L Solid orange top LED by jobabin (11/19/04 10:23 AM) reply	+ / -
The top LED is orange and stays orange even after a power cycle The engine test does not respond. When i Hold in the button on the left the LEDs start at the bottom and works to the top green green orange and stays there. When i move the paper sensor at the pickup roller in the back at the center around a bit and close the door the bottom LED goes green temporaily and back to the top light as orange.

	Re: Laserjet 6L Solid orange top LED by dmzcompute (11/19/04 2:31 PM) reply	+ / -
You need to listen for engine noise and movement when you open and close the toner door. If there is no movement or noise you have a sensor in the paprr path out of position so the printer thinks it has a jam. Most common is the esit sensor by the fuser. Last picture at link below. http://www.fixyourownprinter.com/ps5l.html

	Re: Laserjet 6L Solid orange top LED by jobabin (11/19/04 8:31 PM) reply	+ / -
There is no sound and a sensor out of position makes sence since we just moved halfway accross the country - how is the adjustment made and are the pictures what it should look like in the correct position? Thanks for the info

	Re: Laserjet 6L Solid orange top LED by jobabin (11/19/04 9:21 PM) reply	+ / -
The exit sensor is definatley not where it should be but i can't get it to where it looks like it should be without getting the fuser cover off and i can't seem to get it off - one side isable to come out but the other side is held down with a black plastic peice attached to the right. Any info on how to get the fuser cover off would be appreciated.

	Re: Laserjet 6L Solid orange top LED by jobabin (11/19/04 9:25 PM) reply	+ / -
I got the fuser cover off but i still don't think it is in the correct position.

	Re: Laserjet 6L Solid orange top LED by Anonymous (12/10/08 10:39 PM) reply	+ / -
fantastic pictures and advice worked for me

Post to this thread:

User:
Email:
	Notify me if someone responds
Icon:
Subject:
Message: