HP 3330 Fuser

	HP 3330 Fuser by jon (11/16/04 9:48 AM) reply	+ / -
I need help!!! I have a HP 3330 Fax/Copier/all in one thing and the ink is smearing off after it is done printing. I want to belive it has something to do with the fuser - but I could be very wrong! Any ideas on the problem and/or ways to fix it???? Thanks

	Re: HP 3330 Fuser by moe (11/16/04 1:30 PM) reply	+ / -
OK, it's the fuser. I've replaced a couple of those and I can tell you from experience that it is not fun.

	Re: HP 3330 Fuser by Stephen (11/16/04 5:56 PM) reply	+ / -
It will take about 2 hours if you've never done one, it's not hard, there is just a lot of disassembly required.

	Re: HP 3330 Fuser by daniel1601 (7/26/05 12:09 PM) reply	+ / -
I have the same problem. What is a fuser, and how do I get one?

	Re: HP 3330 Fuser by dmzcompute (7/26/05 1:15 PM) reply	+ / -
The fuser is the item which applies heat to the toner to bind it to thr paper. Go to link below. http://makeashorterlink.com/?G1BF2208B

	Re: HP 3330 Fuser by Anonymous (8/14/05 3:13 PM) reply	+ / -
does the HP 3330 and HP 1200 use the same fuser assembly?

	Re: HP 3330 Fuser by Stephen (8/14/05 4:24 PM) reply	+ / -
Yes, the 3330 and the 1200 use the same fuser.

	LaserJet 3330 Fuser Film Sleeve Kit by twang (5/8/07 7:15 PM) reply	+ / -
LaserJet 3330 Fuser Film Sleeve Kit now available from your favorite printer support site: http://www.fixyourownprinter.com/kits/hp/K95

Post to this thread:

User:
Email:
	Notify me if someone responds
Icon:
Subject:
Message: