S 520 Waste tank Reset

	S 520 Waste tank Reset by Skuntakintey (11/20/04 5:50 AM) reply	+ / -
Hi I am still getting Eight flashing yellow lights after an attempted reset. I used this process. Re: Canon BJC-1000 Waste Full Error Waste Reset /EEPROM Reset Procedure 1: Remove Cartridge 2: Unplug the AC Power Cord 3: Hold down the RESUME button 4: Release RESUME after plugging in the AC Power cord. 5: Press the RESUME once within 5 seconds and release the RESUME . 6: Press and HOLD RESUME for two seconds or more and release it. 7: Press and HOLD RESUME for two seconds or more and release it. 8: Press POWER to set data. I am not sure if it is the correct sequence for the S520 as it is for the BJC-1000. Does anybody know where I am going wrong. Please help. Thanks in advance. Skuntakintey P.S I originally posted in S520 thread but reposted as a new thread.

	Re: S 520 Waste tank Reset by Anonymous (11/22/04 2:52 AM) reply	+ / -
Posted on 3/09/2004 by "chimp says" Thanks a million "chimp says". The following cured my S 520 Waste tank Reset problem. Quote "Re: Waste tank counter reset code for Canon printers. The waste-ink counter for the BJ F900, F890, F700, F500, S900, S820, S750 and S520 are all reset in the same manner. Turn off the printer. Press and hold the RESUME button, then press and hold the POWER button. Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily. You are now in Service mode. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press. 1. service/factory test printout, including ink sensor check 2. EEPROM info printout 3. EEPROM initialization 4. Clear the waste-ink counter 5. Printer model setting. (more selections beyond this- leave this alone) After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart. If you have a defective printer head, your power lamp may flash during the service mode key-in, and info printouts may not work. In this case, clearing the waste-ink counter may not fix your problem." Cheers! Skuntakintey

Post to this thread:

User:
Email:
	Notify me if someone responds
Icon:
Subject:
Message: