| Post a new message thread
 | Canon MPC INKTank FULL by ryan (11/1/04 10:46 PM) | +1 + / - | Help pls !
how to reset Canon MPC 190 / MPC 190 / MPC 390 ?
ryan
|
 | Re: Canon MPC INKTank FULL by Printx  (11/2/04 3:34 PM) | +1 + / - | This procedure is a bit vague but it goes something like this:
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu Copy Copy Copy Scan
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Hope it helps.
|
 | Re: Canon MPC INKTank FULL by ryan (11/3/04 3:09 AM) | + / - | Resetting the Waste Ink Volume Counter
hi Printx thank you for help, but i still confuse on some state as;
1) Enter SERVICE MODE.---
By pressing Menu Copy Copy Copy Scan --- this line ok.
2) Select TEST MODE. --- how to get into test mode ?
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR]. -- this option under test mode or somewhere else ?
5) Select 0. [INK COUNT].
6) Press the [Set] key. --- [set] key same with [Ok] key ?
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
more details pls. thx alot printx
ryan
|
| Re: Canon MPC INKTank FULL by Jim (11/10/04 9:56 PM) | +1 + / - | I guess entering SERVICE MODE similarly to MPC 200. I am experiencing the same difficulties with my Canon. Described above doesn't work. Printx, please help the community.
|
| Re: Canon MPC INKTank FULL by Tibe (11/13/04 12:47 AM) | + / - | i try use this code for mpc200.BUT it doesn`t work.
can somebody help me?
|
| Re: Canon MPC INKTank FULL by Alex (11/22/04 12:42 AM) | + / - | same problem with my MPC190. I'd really apreciate some help. Many thanks.
|
 | Re: Canon MPC INKTank FULL by a (12/1/04 8:24 AM) | + / - | Help
how to reset Canon MPC 190
no work
|
| Re: Canon MPC INKTank FULL by David (12/1/04 6:39 PM) | + / - | Help, I have the problem too.
how to reset the counter of the Canon MPC 190
|
| Re: Canon MPC INKTank FULL by Anonymous (12/11/04 1:19 AM) | +1 + / - | by the way the combination is menu-copy-scan-copy-copy
|
| Re: Canon MPC INKTank FULL by AAN (12/11/04 2:04 AM) | + / - | HOW TO RESET MY MPC 190, I'VE READ ON THIS FORUM BUT ..
I CONFUSED... THE PRINT MUST ON....OR ....NOT
OR AT THE SAME TIME PRESS ON/OFF BUTTON WITH ELSE
PLEASE WITH DETAIL ....
THANK
|
| Re: Canon MPC INKTank FULL by Jim (12/11/04 8:26 PM) | + / - | Thank you, Anonymous. It's just what I was looking for (the correct combination). It works!
|
| Re: Canon MPC INKTank FULL by John (12/13/04 3:04 PM) | + / - | holy crap! finallly !!! My canon is working at last... thanks anonymous... wherever you are... I'll drink a few beers in your name!
|
 | Re: Canon MPC INKTank FULL by ryan (12/14/04 2:17 AM) | + / - | late for me, my printer already send to canon services. by thx all
|
| Re: Canon MPC INKTank FULL by Anonymous (12/15/04 2:46 PM) | + / - | Tnx a lot for this information. I´ve got a MPC 190 from a tipping site for free and now it works fine again. Great thing.
|
 | Re: Canon MPC INKTank FULL by Chuck (12/16/04 1:53 PM) | + / - | It's great to be able to provide people with info to use their printers again, but I caution you with the "Waste Ink Tank Full" error to watch just resetting the error.
This error occurs after a set number of nozzle activations, and it's to protect you from having ink start leaking out of your printer.
The waste ink tank is actually a large cotton pad in the bottom of the machine which absorbs the waste ink, and if this pad becomes full, the ink will pool and, like water, seek the path of least resistance, which could be where the case parts connect, and then leaking out onto your desk or carpet...
Just something to consider.
|
| Re: Canon MPC INKTank FULL by Phil (1/8/05 10:36 AM) | + / - | Does this reset work with th MPC200? I've tried but I can't get to the service mode. I ask because my when I try to print or scan I get the error message that the printer is not connected or switched on and so on. I've tried un-insalling and re-installing but still get the message. The MPC200 shows on the device manager as as multipass and also as a storage device. But when I go click on my computer or scanners and cameras in the control panel it keeps searching and the the pc somtimes locks up. The MPC200 works fine as a photo copier off line. (Windows xp)
|
| re: canon mpc 200 in displey press resume by Alex (1/10/05 4:05 PM) | + / - | in displey are standing check printer press resume please help some one
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (4/9/05 8:47 AM) | + / - | How to enter service mode?
thx
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (4/11/05 5:35 AM) | + / - | but my printer canon mpc190s don't have printer test menu, how can get ut?
|
| Re: Re: Canon MPC INKTank FULL by kandi (4/11/05 5:41 AM) | + / - | how to combinations?
|
| Re: Re: Canon MPC INKTank FULL by kandi (4/11/05 5:43 AM) | + / - | but my canon mpc 190s don't have printer test menu, hot to get it?
|
| Re: Canon MPC INKTank FULL mpc200 by chrchr77 (4/21/05 9:59 AM) | + / - | Re: Canon MPC INKTank FULL mpc200
|
| Re: Canon MPC INKTank FULL by Anonymous (4/29/05 3:15 AM) | +3 + / - | Resetting the Waste Ink Volume Counter
mpc 200
keys copy and menu must be pressed at the same time? when the machine
1)Enter SERVICE MODE.---
By pressing Menu Copy Copy Copy Scan --- this line ok.
2) Select TEST MODE. --- how to get into test mode ?
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR]. -- this option under test mode or somewhere else ?
5) Select 0. [INK COUNT].
6) Press the [Set] key. --- [set] key same with [Ok] key ?
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (6/26/05 6:20 AM) | + / - | I have a MP390 and need waste ink counter reset Have tried above combination am i missing something??
|
| Re: Re: Canon MPC INKTank FULL by Richard Hewitt (6/27/05 8:09 AM) | + / - | Help...
I have an MPC390 withh ink tnk full. How do I get into reset menu for this printer??
Thx for any help :-)) r
|
| Canon Pixma IP2000 InkTank Full by kandi (7/5/05 6:16 AM) | +1 + / - |
Help...
I have an Pixma IP200 withh ink tnk full. How do I get into reset menu for this printer??
Thx for any help!!!!!!!!!!!
|
| Re: Canon MPC INKTank FULL by arly (7/13/05 11:34 PM) | + / - | i have a smartbase mp360 and i don't know how i press service mode.pls help me
|
| canon smartbase mp360 by arly (7/14/05 5:57 AM) | +6 + / - | display to my canon smartbase mp360 says:check printer ##343#
what it's this? pls help me
|
| Re: Canon MPC INKTank FULL by arly (7/14/05 6:11 AM) | + / - | says: check printer ##343#
pls help me
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (7/14/05 6:21 AM) | +1 + / - | Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing menu-copy-scan-copy-copy--- this line ok.
2) Select TEST MODE. --- how to get into test mode ?
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR]. -- this option under test mode or somewhere else ?
5) Select 0. [INK COUNT].
6) Press the [Set] key. --- [set] key same with [Ok] key ?
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key..
|
| Re: Canon MPC INKTank FULL by arly (7/15/05 11:30 PM) | + / - | i can't enter service mode by pressing menu-copy-scan-copy-copy
|
 | smartbase mp360 by arly (7/18/05 12:04 AM) | +2 + / - | how i fix my canon smartbase mp360? (check printer ##343#) pls help me urgent
|
| Re: Canon MPC INKTank FULL by baikhoon (7/18/05 1:31 AM) | + / - | i can't work at home becouse resume key##335
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (7/25/05 1:37 AM) | + / - | reset canon
|
| Canon F50 INKTank FULL by AngelT (8/1/05 1:37 PM) | +3 + / - | It could be due to "waste tank full" alarm; you may need to reset the waste tank counter.
I found a reset sequence for a MP730 printer in this website that works for F30 and F50 as well. Try:
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Skip step (6) since there is no [OK] key on F30 printers.
AngelT
|
| Re: Canon Pixma IP2000 InkTank Full by syamsir (8/16/05 6:36 PM) | + / - | Help...
I have an Pixma IP200 withh ink tnk full. How do I get into reset menu for this printer??
Thx for any help!!!!!!!!!!!
|
| Re: Re: Canon MPC INKTank FULL by lp (8/17/05 5:57 PM) | + / - |
I am pressing the above sequence and nothing happens, what am I missing?
|
| Canon MP390 INKTank FULL by lp (8/20/05 4:55 PM) | + / - | Can anybody explain in detail how to enter service mode? none of the above combinations works. Printer is on/off? menu and scan/copy pressed in the same time or not?
|
| Servic Mode MP360 by kaydin1st (8/23/05 12:31 PM) | + / - | I have one of these it took a little trail and error to find service mode but here is the keys
1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset it is simalar to what has already been posted
2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set
Then press Stop/Reset Followed by the power button and then wait for it to restart.
Hope this is not to confusing
|
| Re: Servic Mode MP360/390 by lp (8/24/05 3:25 PM) | + / - |
this was awesome, finally it worked, thank you so much
|
| Re: Re: Canon MPC INKTank FULL (MPC200) by urbanp (9/3/05 1:47 PM) | + / - | Hey!
I have tried to reset the waste ink counter on my MPC200.
I managed to perform all steps (from comment #2), but the error ##335 is still beeing reported.
Can anybody help me?
Thanks.
|
| Re: Canon MPC INKTank FULL by Kerri (9/3/05 5:58 PM) | + / - | My Canon MPC190 printer/scanner/copier has a message on
screen that says "WASTE INK NEAR FULL".
What is the safest way to fix this problem and get my
printer working again.
Nobody told us about this problem when we purchased it.
Many thanks,
Kerri
|
| Re: Canon MPC INKTank FULL by Stephen (9/3/05 8:17 PM) | + / - | You can "probably" do this once safely, if you reset the counter too many times without changing or cleaning the waste ink pads you run the risk of spilling ink on whatever the printer is sitting on.
proceedure follows
•
mpc190/200
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-Scan-Copy-Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
good luck
|
| Re: Canon MPC INKTank FULL by urbanp (9/4/05 1:44 AM) | + / - | Stephen!
I already know the procedure you provided, but it does not fix the problem.
After I press [OK] button (step 6) printer loads a paper.
Then LCD display shows what I saw in step 4 (- 8-3 +).
Then I press the [Stop/Reset] key and the LCD display shows Test mode (like after pressing [OK] in step 2).
Then I press the [ON/OFF] key. The display says Please wait and the paper is beeing unloaded.
After that the LCD display shows "Copy mode" and it still shows error ##335.
Can you help me?
BTW: I have cleaned the waste ink pads after unsuccesful reset and then I tried again, but the printer still shows the error.
|
| Re: Canon MPC INKTank FULL by urbanp (9/4/05 3:28 AM) | +1 + / - | I did it.
I removed the printhead, cleaned it and put it back.
Then the printer reported "Wrong cartridge". I replaced the printhead with new one (that I happened to have here) and the problem was fixed.
|
| Re: Canon MPC INKTank FULL by niggles (9/10/05 1:43 AM) | + / - | Stephen & urbanp,
I've tried your fixes, including cleaning the printhead and inkpad, but still have the problem. Do you have any further advice???
Help!!!!
|
| Re: Canon mpc190 by Keith Reid (9/12/05 12:59 AM) | + / - | I keep getting error 335 on my printer, can anyone help me please? Cheers Keith
|
| Re: Canon Pixma IP2000 InkTank Full by dannzz (9/15/05 12:11 PM) | + / - | IS there software to reset the PIXMA iP2000 counter?
|
| Re: Canon MPC INKTank FULL by annoynymous (9/28/05 9:28 AM) | + / - | i do not know the keys for the menu scan and copy buttons, can someone please describe where the buttons are and which are which, sorry i cant get hold of a manual. by the way i have an mpc200
|
| Re: Canon MPC INKTank FULL by osram (10/1/05 2:27 AM) | + / - |
Hey..... after reset the error using the steps suggest here, its detect MultiPass F10 instead of MPC 190......Oh no no no no no no no... how to get it back to MPC190 ?
|
| Re: Canon MPC INKTank FULL by alextllam (10/8/05 2:01 AM) | + / - | My printer is a mpc200.
The procedure "Resetting the Waste Ink Volume Counter" does not resolve my printer's problem. it still shows error ##335.
When going through all messages, I have not seen any one with a MPC200 has got the problem resolved by using the procedure.
One message stated: "I removed the printhead, cleaned it and put it back." I want to give it a try.
Can anyone advice me how to remove the printhead of a mpc200? I took out the six srews (2 in front and 4 at the back), and I still could not dis-assemble any part.
Thanks...Alex
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (10/10/05 12:33 AM) | + / - | When i press the "INK COUNTER", The "Registration Failed" will appear on the screen. What's the problem going on actually??
|
| Re: Re: Canon MPC INKTank FULL by alextllam (10/10/05 5:54 AM) | + / - | My printer is a mpc200.
My friend helped me to fix it by removing the printhead, and cleaned it. He said he had to take out 13 screws before he could take out the printhead.
Anyway, it was resolved.
|
 | Canon multipass F10 ink waste counter reset by Elias Handal (10/12/05 10:39 AM) | + / - | I need to reset the ink counter...please help
Thanks
|
| Canon MPC error (MPC200) by Sunny (10/14/05 8:20 PM) | + / - | I did all the stuff above re; waste tank etc, still have error #335 on my printer. I had this once before and some how it was fixed but it was just a fluke!
HELP!?
|
| Re: Canon MPC 360 alarm blinking by awsegraves (10/22/05 6:39 PM) | + / - | Getting nothing from print cartridge - no movement - scanner works but no printing. Happened suddenly after using printer for about a year. I have tried removing the print cartridges and printhead assembly. I am able to get into service mode but can't get the alarm to stop or reset
|
| mpc200 ##335 by Anonymous (10/25/05 6:11 AM) | + / - | still cant get mpc200 working (error code ##335) can anyone publish a guide to dismantling it
|
| mpc 400 by habib (edited 10/27/05 1:24 PM) | +1 + / - | i have MPC400 with ##343 can you help me
|
| mpc 400 by habib (edited 10/27/05 12:38 PM) | +1 + / - | i have MPC400 with error code ##343 can you help me
|
| Re: Canon MPC INKTank FULL by Sunny (10/27/05 2:43 PM) | + / - | I dismantled mine
what a mission
take it to a shop, probably easier. i still have error message!
|
| Re: Canon Pixma IP2000 InkTank Full by fmg (11/16/05 4:20 AM) | + / - | XP
-Start Menu
-Printers and Faxes
-Right Click on Printer
-Maintenance
-Ink Counter Reset
Hope this is what u lokking 4.
|
| Canon MPC 190 SCANNER ERROR & ##335 by naufal nohan (11/24/05 12:01 AM) | +1 + / - | I have problem with my MPC190,
after success reseting waste ink full counter, my printer show:
SCANNER ERRO :
CHECK PRINTER
PRESS RESUME KEY
##335
help me please...
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (11/25/05 7:14 AM) | + / - | Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu Copy Scan Copy Scan
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
|
| Re: Canon MPC INKTank FULL by Shacal (11/26/05 4:13 AM) | +1 + / - | MPC200
Resetting the Waste Ink Volume Counter is not working, still getting ##335.
So, how to fix that?
|
| Pixma 2000 Waste Reset by technician (11/27/05 9:14 AM) | + / - | Hi,
I know how to reset Pixma 2000
Actually I want to share it free
But right now I'm need alot of money to buy milk and other needs for my kids
Pls anyone who have alot of egold exchange to my knowledge ?
Many Thanks
Regards
Canon Technician
|
| Canon MP390 Won't print correctly by gothicfaery (11/27/05 2:06 PM) | + / - | Ok.. I have tried everything everyone has said about this.
When I print a page, it looks as though the ink cartridge is low since the paper comes out with white streaks, partial printing etc... I have changed the cartride, re-aligned everything, cleaned and deep cleaned, checked the paper thing, fixed the waste ink full thing, I have done everything I know how and the problem still isnt fixed.
Of course canon is closed on Sundays!
What am i missing? I've had this printer for over a year and it worked great and then all of a sudden.. BOOM! This happens.. Grr!
|
| Re: Pixma 2000 Waste Reset by Anonymous (11/29/05 4:24 PM) | + / - | >I know how to reset Pixma 2000
>Actually I want to share it free
>But right now I'm need alot of money to buy milk and other >needs for my kids
>Pls anyone who have alot of egold exchange to my knowledge ?
Sure! Post the fix here together with your address, and I'll post you a bottle of milk.
|
| Re: Re: Canon MPC 200 Printer by Anonymous (12/3/05 2:51 AM) | +1 + / - | I have been trying to reset the waist ink near full message can you help me please i'm realy strugling.....
|
| Re: Canon MP390 Won't print correctly by Anonymous (12/5/05 11:09 AM) | + / - | I had the same problem, just took the whole printing head out and with ink catridges out I put it in hot water, sank it for a few minutes and shaking it unclogged between ink notches. I did it a few times and it worked right away after, I just let it dry on paper towel, but also I saw people recommending using air spray to unclog the head.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (12/7/05 2:00 PM) | + / - | Dunno how late this is but the mpc 190 and 200 have to have a software patch under Xp if loaded with SP2 You can download from canon site
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (12/12/05 7:41 AM) | + / - | Thanks for the info.regarding MP360, is there any special way to remove an replace waste ink tank.
|
| Canon MP390 INK Tank FULL by BeerCash (12/18/05 1:53 PM) | + / - | Hi There,
I have a Canon SmartBase MP390 printer, which says that the "used ink tank is full"
I read through the forums and I found several advices, however none of them works on my device. The commands mentioned did not do anything.
My MP390 was purchased in Europe. Might this have a different command sequence?
Can you please help me.
|
| Re: Canon MP390 INK Tank FULL by Anonymous (12/20/05 2:51 AM) | + / - | best advice to ring Canon and take on a 2 year warranty for £16, make sure it covers everything. tel: 0870-122 6543
|
| Canon MPC 200 Printer by pet (12/23/05 7:31 PM) | + / - | I tried all the informations that everyone provided but it didn't work. After I switched off and on, my mpc 200 priter keeps on flashing like nothing happened. Can anyone help me?
thnx
|
| Re: Canon MPC INKTank FULL by freek (1/5/06 9:55 AM) | + / - | Can anyone post a clear version of how to reset the mpc190 printer? There's a lot of "enter this or that mode but it doesn't work for the mpc190.
Please again..........
|
| Re: Canon MP150 INKTank FULL by JJOOJJOO (1/6/06 9:55 PM) | +1 + / - | Canon MP150 INKTank FULL
Help Me Please--------------
Code .......
|
| Re: Servic Mode MP360 by Anup (1/12/06 8:39 PM) | + / - | First I would like to thank all this internet community who had started discussing their problems and share their knowledge and positive results, and
thanks to 'keydin1st' to suggest the steps in so easy manner. I followed these steps to clear the ink counter and found it worked. ... Hurrah!!!
|
| Re: Servic Mode MP360 by Anonymous (1/14/06 7:47 AM) | -1 + / - | I am fall on my knees grateful to you kaydin1st. You have NO idea how much your info, which reset my MP390, helped me. God bless you!!!!!!!!!!!
|
| Canon SmartBase MP360S by wen153 (1/15/06 12:32 PM) | + / - | Please Help, my all in one printer, started to play up this few days:
"SCANNER ERROR"came up on the screen!!!!
Secondly, when I tried to scan, the colour come out to be red, but my document is black and white. When I tried to copy a document, half of it seems to be very very light, can't read at all.
It has just passed its warranty. Please Help!!!!!!!!!
Thank you very much for your help!!!
|
| Re: Canon SmartBase MP360S by Anonymous (1/15/06 6:52 PM) | + / - | I read your problem.I'm not so sure about the solution, but their might be one of many causes like-
1) is the scanner lamp glow normally?
if not, check for scanner lamp and if necessary replace it.
2) have you changed any settings in it?
if yes, reset the original settings.
3) any miss-connections or over- voltage from the electric power source.
you may clear the user data and use original data by doing-
1> go into the service mode.
2> select clear by pressing + or -.
3> if 'Clear' appears on screen, press OK. wait for 5 mins.
4> restart the M/c.
try this out and hope it will help you, good luck.
|
| canon mp360s by anup (1/15/06 9:35 PM) | + / - | Hi 'WEN153',I read your problem.I'm not so sure about the solution, but their might be one of many causes like-
1) is the scanner lamp glow normally?
if not, check for scanner lamp and if necessary replace it.
2) have you changed any settings in it?
if yes, reset the original settings.
3) any miss-connections or over- voltage from the electric power source.
you may clear the user data and use original data by doing-
1> go into the service mode.
2> select clear by pressing + or -.
3> if 'Clear' appears on screen, press OK. wait for 5 mins.
4> restart the M/c.
try this out and hope it will help you, good luck.
|
| Re: canon mp360s by wen153 (1/16/06 11:21 AM) | + / - | Thank you for your reply.
1) The scanner lamp glow normally
2) I haven't changed any settings in it
I've tried what you suggest by following your direction, but when I get to point 3, I got 'Clear' appears on screen, but then there are a few option:
TEL
User SW
Service SW
NCU
Service Data
Report
COunter
ALL
Which one should I choose???
Thank you for your help.
Wendy
|
| Re: Canon MPC INKTank FULL by vujad (1/17/06 4:16 AM) | + / - | Hi,
I have a problem with my Cannon fax/printer B180C. It show`s error ##343, "Check Printer".
Considering that I try few things like to unplugn and plug the power cord, clean cartridge, put the new one but there was no improvement, please be kind and help me to resolve this problem and fix the fax.
Thanks
|
| Re: Canon F50 INKTank FULL by Anonymous (1/17/06 9:34 AM) | -2 + / - | Angel T
Thank You VERY much
Your method of getting into service mode worked on my F80 and I was able to reset the counter,
Thank You Thank You Thank You Thank You Thank You
|
| Re: Service Mode smartbase MP390 by Anonymous (1/19/06 11:53 AM) | + / - | hi my names ronan and im having trouble getting into the service mode on my smartbase mp390 please please please can you explain to me how to do this and expain to me how to reset ink pad full counter same problem as eveyone else i must be stupid or something i cant solve it please help
|
| Re: Canon MP150 INKTank FULL by Anonymous (1/22/06 10:15 PM) | + / - | heip please ....code
|
| Re: Canon MPC INKTank FULL by Anonymous (1/24/06 1:37 PM) | + / - | Kurva anyátokat ,hol a faszomban van a nyomtatón SCAN MENÜ gomb? ÉS A COPY-t sem találom, A faszomat a gyökér fejetekbe, 100 ugyanazt írjátok le. De semmit sem tudtok, pusztuljatok anyátokban.
|
| Re: Canon MP390 Won't print correctly by granville85 (2/5/06 8:23 AM) | + / - | I had/have exactly the same problem with an MPC200 and I'd also had the thing for over a year. No problems, then over a few days the ink supply just gradually gave up, first getting streaky then failing completely. Tried changing the cartridges, cleaning etc., even ordered a new printhead - no use. Seems as if something internal is giving too weak a signal to the cartridges. Canon, by the way, were no help at all. I e-mailed them explaining the problem and saying I'd already tried changing the printhead; they wrote back and said 'Try changing the printhead.'
Does anyone have any ideas? Is this fixable or should I just take the thing to the dump?
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (2/9/06 8:14 AM) | + / - | have you had any luck getting into service mode i have same problem and cant get into service mode any help please
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 1:54 PM) | -1 + / - | Canon MPC INKTank FULL
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 1:55 PM) | + / - | Canon MPC INKTank FULL
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 1:56 PM) | + / - | Canon MPC INKTank FULL
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 1:57 PM) | + / - | Canon MPC INKTank FULL
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 2:01 PM) | + / - | Canon MPC 190, waste ink near full
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 2:04 PM) | + / - | Canon MPC 190, waste ink near full
|
| Re: Canon MPC INKTank FULL by ahmtito (2/11/06 2:10 PM) | + / - | Canon MPC 190 waste ink near full
|
| Re: Re: Canon MPC INKTank FULL by ahmtito (2/11/06 2:24 PM) | + / - | Canon MPC INKTank FULL
|
| Re: Re: Canon MPC INKTank FULL by ahmtito (2/11/06 2:25 PM) | + / - | Canon MPC INKTank FULL
|
| Re: Re: Re: Canon MPC INKTank FULL by granville85 (2/11/06 8:47 PM) | + / - | You enter service mode by pressing Menu-Copy-Scan-Copy-Copy.
|
| Re: Canon MP360 by valicocos (2/14/06 11:04 PM) | + / - | check printer ##343
how to enter service mode?
|
| Re: Canon MPC 600 Service Error 343 - INKTank FULL by VitalStatistic63 (2/15/06 4:35 PM) | + / - | Multipass C600
Waste ink reset procedure
Enter service mode by
Press Menu then Copy then #
Press < or > and select 7. Printer
Press OK
Press < or > and select 5. Ink Abs Capa
Press OK
Enter appropriate value 0-100%
Press OK
This allows printer to be used in the meantime.
Book parts call to replace Waste Ink Pads to avoid later ink spillage.
|
| Re: Canon MPC INKTank FULL by Anonymous (2/16/06 5:13 PM) | + / - | it blinks "wrong cartridge".I put new ones.Still the same.What to do?
|
| Re: Canon MPC INKTank FULL by siro (3/1/06 6:05 AM) | + / - | please I need your help I have Canon Mpc190 and it show Wrong Cartridge error I do what I saw in your web site to clear waste tank but it dosent work it's still the same problem I don't know what i must to do I try all steps carefully servel times but everything are still the same Wrong Cartridge HELPPPPP PLEASEEEEEE.
|
| Re: Canon MPC INKTank FULL by siro (3/1/06 6:12 AM) | + / - | please I need your help I have Canon Mpc190 and it show Wrong Cartridge error I do what I saw in your web site to clear waste tank but it dosent work it's still the same problem I don't know what i must to do I try all steps carefully servel times but everything are still the same Wrong Cartridge HELPPPPP PLEASEEEEEE.
|
| Re: Canon MPC INKTank FULL by james goodman (3/1/06 8:40 AM) | + / - | with regard to the mp390 service menu problem, the following has been google translated from french into english so excuse the wording. It does however work,
1) key: Additional Functions(a star surrounded by a round in high A right of the 4 keys small),
2)touche: Scan,
3)touche Copy,
4)touche Scan
do this with the printer on, when you are in the service menu, follow the instructions in one of the above messages to clear the ink tank waste counter.
|
| Canon Pixma IP2000 Waste tank full by lokiasan (3/10/06 5:24 PM) | + / - | Hello, everbody in the world, could you let me know how to reset waste tank counter problem, pls helllllp meeee.....
|
| Re: Canon MPC INKTank FULL by Anonymous (3/13/06 11:03 AM) | + / - | Help pls !
how to reset Canon MP150?
|
| Re: Canon MPC INKTank FULL by vincenzo_k (3/25/06 8:08 AM) | + / - | I have the same problem w my mp390. I did what AngelT said and it worked splendidly. My error msg is now gone.. thank you :D
I have one question though.
How do i empty my waste ink tank? anyone can help?
Thanks
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (4/12/06 1:55 AM) | + / - | how do I enter service mode on canon mpc190. Do I have the printer turned on or off. Do I hold down the menu button while pressing the copy button. Any help????
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (4/12/06 1:58 AM) | + / - | how do I enter service mode on canon mpc190. Do I have the printer turned on or off. Do I hold down the menu button while pressing the copy button. Any help????
|
| Re: Canon MPC INKTank FULL by hellhound (4/12/06 5:45 AM) | + / - | ANYBODY knows something about HOW TO RESET CANON MP150 (not ip1600 or ip2200).
PLEASE, HELP, can't find anything about!!!
|
| Re: Canon MPC INKTank FULL by Anonymous (4/20/06 2:29 AM) | + / - | mpc400 error #343 check printer.
my printer has gone funny alklk of a sudden, anyone any ideas how I can fix it???
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (4/20/06 7:30 AM) | + / - | How do i do for entry in service mode?
When I start with menu after i don't find "copy"....etc...
How do I do?
Thanks
|
| Re: Canon MPC INKTank FULL by irwannn (4/29/06 8:07 AM) | + / - | just for hellhound :
To Reset mp150, you can do the same procedure with canon ip2000, but after enter service mode, press resume 4 times...if you need service manual for canon ip1600, ip4200, ip5200, mp150, mp170,etc. just email me!!!
|
| Re: Canon MP150 cartrigde led (both) blink orange by hades06 (5/3/06 2:58 AM) | +2 + / - | Hi! my mp150 cartrigde led blinking (both led) in the printer manual say the ink level is low... but with 2 new cartridge (color and black) the printer work. I put back the old cartridge (color and black) tot verify if for shure they are damaged and after that with the 2 new cartridge i have now the old problem (cartridge led they are blinking again now). I thing the printer memorized the error... what can i do? HELP ME!!!
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (5/4/06 12:22 AM) | + / - | hy y need a manual service for my mp150 canon , please
or a reset code for the cartrige black or color
|
| Re: Canon MPC INKTank FULL by irwannn (5/6/06 6:24 AM) | + / - | if you need service manual for mp150, mp170, mp190s. please email me...!!!!
|
| Re: Canon MPC INKTank FULL by mir (5/6/06 8:24 AM) | + / - | With my Canon MPC 190 my problem is that I keep on getting the error message 'waste ink near full'. According to previous postings which I've read, I have to enter the 'service mode' by pressing Menu-Copy-Scan-Copy-Copy. However, I cannot access these possibilities. When I press the menu switch, I can only select one of the following possibilities:
1. Enlarge/Reduce
2. Paper select
3. Density
4. Image quality
5. Special copy
6. Ink volume
7. Maintenance
8. User Data
Can anybody tell me how to access/enter the service mode?
At the moment the orange light is blinking, the printer can still scan, but it won't print.
All help greatly appreciated, thanks.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (5/11/06 11:22 PM) | + / - | I have tried many times, your solution is not working for me. I own a Canon MPC190S , i really don't know how to reset the "waste ink near full" error, when i keep selecting "MENU" i go into user data, i got into "Reset Ink Count", when i press ok, "registration fail" came out. Please help
|
| Re: Canon MPC INKTank FULL by irwannn (5/12/06 6:09 AM) | + / - | if i am not wrong. to reset mp190 :
1. printer in standby.
2. Select menu
3. select 1. enlarge/reduce
4. press copy scan copy copy..
5. === printer in service mode ===
6. select #7 printer function setting
7. select 5 ink abs capa
8. use the < / > button to enter a value 0 to 100 (%)
Indonesian :
Jika saya tidak salah untuk reset waste ink mp190 adalah sbb :
1. printer dlm keadaan standby
2. pilih menu
3. pilih menu no. 1 enlarge/reduce
4. tekan copy scan copy copy
5. printer dlm keadaan service mode.
6. pilih menu ke #7 printer funciotn setting
7. pilih 5 ink abs capa
8. gunakan tombol / untuk merubah2 angkanya. atau isi dengan angka 0.
|
| Re: Canon Multipass F80 error by blindfold (5/12/06 12:03 PM) | + / - | My Multipass F80 alarm flashes with the words CHECK PRINTER - PRESS RESUME KEY
I press the resume without any change.
Can anyone help?
|
| Re: Re: Canon Multipass F80 error by Anonymous (5/12/06 2:15 PM) | + / - | Blindfold--
What a coincidence!!! I have the same printer with the same problem. Mine started last night. A PDF I found online said CHECK PRINTER meant one of two things:
1) There could be a paper jam or some other obstruction preventing the printhead holder mechanism from moving back and forth. However, if you don't find any problem and pressing RESUME doesn't clear it, the only alternative is to call Canon Customer Care.
I've never had a paper jam in three years of use, and there wasn't a jam or any other obstruction this time either.
2) The waste ink tank may be full. Again, the only alternative is to call Canon Customer Care.
The tank is actually a pad or sponge at the bottom of the printer. It is contained in a black plastic holder and runs the width of the printer underneath the path of the printhead.
In looking at this forum, apparently the determination of full on many Canon printers comes from a counter, not a sensor. There's a counter you can reset when in service mode in the software. I found no specific instructions for Multipass F80, but tried one that people said worked on an F50. I was able to navigate through it, but it didn't help, the error is still there, still can't print.
Here it is, see if it helps you:
1) Enter Service Mode
Hit [MENU]-[COPY]-[#]
Display says:
SERVICE MODE
#1 SSSW
2) Select Test Mode
Use the arrow keys under the LCD display. If yours is like mine, hit the left arrow once. Otherwise just keep moving through the list with the arrow keys until you see it.
When you reach the right place, the display says:
SERVICE MODE
TEST MODE
Press [SET] when you reach it.
Display says:
TEST MODE [1]-[8]
CF-FH2 :USA-07-02
Now press [8].
Display says:
TEST MODE [1]-[8]
PLEASE WAIT
then after making some mechanical noises,
8: PRINTER TEST
[2]---[8]
Now press [3].
Display says:
8-3: EEPROM CLEAR
[0]:INK COUNT alternating with [1]:2PURGE FLAG
Now press [0].
Display says:
TEST MODE [1]-[8]
8: PRINTER TEST
Instructions I got said press [OK], but there isn't one on the F80, so skip that part and press [STOP/RESET] followed by [ON/OFF].
This made no difference at all, still get Check Printer error. Let me know if it helps you.
If there are any MultiPass F80 experts out there, please HELP!!!!
|
| Re: Re: canon mp360s by Anonymous (5/18/06 5:55 AM) | + / - | I have a similar problem to this.
I also have "Scanner Error" on my MP390 except it only scans in yellow & white (not black and white!) when scanning a black and white image. Scanning a colour image is even worse. I also cannot do a simple black and white photocopy.
I have tried entering service mode (Menu-Copy-Scan-Copy-Scan) but with no luck. How do I get into service mode on a MP390?!?! It seems to be posted here in many different ways.
Wen, did you ever get a reply to your post or solve your problem?
Thanks in advance for any help. :-)
|
| Re: Canon MPC INKTank FULL by irwannn (5/23/06 6:09 AM) | + / - | i have almost all new canon printer service manual and product service detail, ip and mp series, but i don't have i6500/i6100 service manual, if someone have it, i would glad to exchange....thanks.
|
| Re: Canon MPC INKTank FULL by doo (5/25/06 7:11 AM) | + / - | help me MP150 tank full
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (5/27/06 4:17 AM) | + / - | servis manual printer mp150, mp170, mp190s
|
| Re:Only one colour is printing by gryffin (6/5/06 12:36 AM) | + / - | Hi I have changed all the ink tanks after my pc was in storage for a year, the black is printing well but the colour cartrige is only printing yellow......any ideas anyone please!
Gryff
|
| Re: Canon MPC INKTank FULL by polppol (6/5/06 9:30 PM) | + / - | how about MP500 plz mail to me polppol@hotmail.com
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (6/7/06 2:13 AM) | + / - | ##343 [ TX / RX ] Ink detection waste ink tank full.
A. Cause: The ink detection waste ink tank is full.
Solution: Power cycle the machine (unplug unit).
Solution: Replace the ink detection waste ink pad. Reset the ink detection waste ink pad capacity to 0, in the service mode. Note: if the capacity of the absorption pad is unclear, register a value corresponding to the quantity of absorbed ink in pad
Solution: Replace the PCNT PWB, and register a value for the absorption capacity, according to the quantity of absorbed ink in pad.
Solution: Replace the SCNT PWB, and register a value for the absorption capacity, according to the quantity of absorbed ink in pad.
|
| Re: Canon MPC 400/600F Waste Ink Reset by Anonymous (6/7/06 2:28 AM) | + / - | Service Mode
1} Press Menu Button then Copy Button.
2} Press # Button
3) Displays "SERVICE MODE"
#SSSW
4} Search/Scroll to #PRINTER
5} Search/Scroll to 5. INK ABS CAPA
6} Enter Value 0-100%
|
| Re: Canon MPC INKTank FULL by Hollan (6/20/06 6:36 AM) | + / - | it really works, Thank you all!!!!!!
|
| Re: Re: Re: Canon Multipass F80 error by Anonymous (6/20/06 8:25 AM) | + / - | It works
Tried several other fixes and this works for the Multipass F80
Thanks
1) Enter Service Mode
Hit [MENU]-[COPY]-[#]
Display says:
SERVICE MODE
#1 SSSW
2) Select Test Mode
Use the arrow keys under the LCD display. If yours is like mine, hit the left arrow once. Otherwise just keep moving through the list with the arrow keys until you see it.
When you reach the right place, the display says:
SERVICE MODE
TEST MODE
Press [SET] when you reach it.
Display says:
TEST MODE [1]-[8]
CF-FH2 :USA-07-02
Now press [8].
Display says:
TEST MODE [1]-[8]
PLEASE WAIT
then after making some mechanical noises,
8: PRINTER TEST
[2]---[8]
Now press [3].
Display says:
8-3: EEPROM CLEAR
[0]:INK COUNT alternating with [1]:2PURGE FLAG
Now press [0].
Display says:
TEST MODE [1]-[8]
8: PRINTER TEST
Instructions I got said press [OK], but there isn't one on the F80, so skip that part and press [STOP/RESET] followed by [ON/OFF].
|
| MPC 190 error #335 Waste Ink by Cornelius Goh (6/25/06 3:33 AM) | + / - | I have finally fixed this frustrated problem! You don't need any hammer to crush it in your garden :) You just need 3 things:
- a cross screw-driver
- a lot of wiper sheets or blotting papers which can easily absorb inks.
- a pair of gloves (to protect your fingers from the inks)
Procedure A) Wiping away waste inks inside MPC 190 Printer box
Precaution: disconnect power cable and USB printer cable!!!
1) Open the right pannel. There are few tiny screws at the back (next to the USB cable slot). You might need a little force to open the right pannel.
2) Locate the small black color waste ink pad, which is below the ink tanks. (you can slightly push the ink tanks away from its original right position in the printer to the extreme left)
3) With a pincer or a long-enough screw driver, use the papers to wipe away extra inks. You must repeat with many sheets of papers until the last sheet is dry with nothing or little ink left.
4) Done. Close the right panel and re-connect the printer. Go to Procedure B) below.
Procedure B)Reset Waste Ink Code
1) Enter SERVICE MODE by pressing sequentially Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Press '+' 8 times till 'Select [8]' PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
8) Done
Your printer is now saved! Clean the nozzle, print head as you do normally to have nice printout.
Please send me a thank-you note to corneliusgoh@gmail.com if you manage to save your MPC190!
Cornelius Goh
Singapore
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (6/29/06 10:08 PM) | + / - | I need reset counter MP150 please thank you
|
| Re: Canon MPC INKTank FULL by Anonymous (7/1/06 3:02 AM) | + / - | hlep me reset counter MP150
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (7/11/06 11:23 AM) | + / - | Would like to request for the service manual for canon pixma mp150.
Thanx.
|
| Re: MPC 190 error #335 Waste Ink by Anonymous (7/11/06 1:38 PM) | + / - | This totally works! Fantastic, thanks so much for the top tip!
|
| Re: Canon MPC INKTank FULL by Anonymous (7/16/06 12:03 PM) | + / - | I have a canon mp360 printer. My problem is the printer will not print Black clearly. the text is faded looking. I have replace the cartridge, intalled a new print head and still have the same problem.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (7/19/06 3:15 AM) | + / - | Do you have the reset code for the Canon IP1600?
|
| Re: Canon MP360S - 'SET KEY' by Peter Mackey (7/19/06 4:13 AM) | + / - | Where is the 'SET 'key?
The 'OK' key does not work as the SET key, and I can not find any other option.
|
| Re: Servic Mode MP360 by Anonymous (7/24/06 10:37 PM) | + / - | ^^ kaydin1st is correct..
MP360 - SERVICE MODE: Additional Functions, Scan, Copy, Scan
|
| canon smartbase mp360 by kariplor (8/15/06 6:12 AM) | +1 + / - | when i switch on my printer ther is a message flashing(PUT IN CARTRIDGE).i changed the cartrige 2 days ago and it was allright.can you help me please.
|
| Re: Re: Re: Canon Multipass F80 error by Anonymous (8/21/06 9:57 AM) | + / - | Any luck yet This just started . Scanner works I tried all the reset and test modes but nothing Even called canon they suggested buying a new printer!! Help if u found anything out please!! Thanks I hope!
|
| Re: Canon MPC INKTank FULL by LuckyDeac (8/24/06 7:30 PM) | + / - | Many thanks to ANONYMOUS for the info posted 6/20/06 on F80! I followed the instructions (my machine has been warning me for a long time, and finally quit printing) and now at least I can print again and that annoying message "Ink tank near full" is gone. Now I just need to tackle cleaning out the full ink pad before it overflows and makes a big mess! Any suggestions for the F80 out there? Thanks again!
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (9/6/06 6:28 AM) | + / - | do you really have service manual for canon mp150?
I really need one
Please let me know.
Daniel
|
| Re: Canon MPC INKTank FULL by almotions (9/6/06 9:40 PM) | + / - | hi,
i have a problem with my MCP 190.It seems that the printhead does not move to the left position whenever the cover is open and printing job is super slow.Please advice.Thanks.
|
| Re: Canon MPC INKTank FULL by irwannn (9/7/06 8:13 AM) | + / - | hi everyone,
i need service manual for epson c41, c43, c45, c65, c67, c87, r230 (service manual and adjusment program), r250, r310, stylus 1160.
And i have general tool for printer canon :
i250, i320, ip1000, ip1500, ip1600, and ip1300/ip1700,
service manual :
ip1600, mp150, mp130, mp170, mp160, np530, ip6700d, mp460, etc.
if you have what i need, i would be glad to exchange.
irwannn@yahoo.com
|
| Re: MPC 190 error #335 Waste Ink by rety (9/8/06 1:42 AM) | + / - | Hi Cornelius, last month my printer canon MPC190 also faced this problem ##335, but after following your great step from"enter SERVICE MODE" till "INK COUNT" OK, everything's back to normal again.
But now, the problem comes again. At first it blinked and stated "Wrong cartridge" , i wanna take out the cartridge and open the cover, but the cartridge didn't come to the middle. So i leave it, and the next day , it blinked and stated again "##335 CHECK PRINTER PRESS RESUME". So i follow my previous way using the above mentioned step. For this time, it doesn't come back to normal as i wish. It's still blinking "##335 " till now.
Could you pls advise me the second step to fix this. I really wish that you could help me for this 2nd time.
Looking forward to hearing from you soon.
Best regards, Rety
|
| Re: Canon MPC200 INKTank FULL by junior (9/8/06 12:10 PM) | + / - | I can´t enter in service mode
|
| Re: Re: Canon MPC200 INKTank FULL by Anonymous (9/8/06 12:33 PM) | + / - | and I try to do what
|
| Re: Canon MPC190 Error by Anonymous (9/11/06 3:27 AM) | + / - | Hey
my Canon Imageclass MPC190 printer/scanner
is not working properly
it prints okay
but the scanner doesnt work
it starts, and flashes the Alarm light 8-9 times
then keeps flashing SCANNER ERROR
when i try to scan or copy
it scans a full page of black
and copy it prints a full page of black (waste of ink)
and thats all, i am unsure what could be wrong with it
please help!
|
| Re: Canon MPC INKTank FULL by printerquestion  (9/11/06 10:30 PM) | +2 + / - | Hi,
My Canon MP 390 does not print with the black cartrige. It has a new one but it wont print, it does well with the color one but not the black one. I have been told that it should be the printhead but i dont know for sure. Can someone help me
|
| Canon MPC 190 INKTank FULL by Mainland (9/17/06 11:12 AM) | + / - | I have managed to reset my MCP 190 and can continue - for the time being. But how many standard pages (b/w) will the printer do until it refuses again and there is no remedy?
|
| Re: Re: Canon MPC INKTank FULL by joep (9/21/06 6:44 AM) | + / - | Hi,
Can i get a service manual for the canon mp170?
|
| Re: Canon MPC INKTank FULL by mp150 (9/26/06 10:59 PM) | + / - | MP 150
1,power off, hold stop/reset ,power on;
2,hold power,release stop/reset, push stop/reset twice;
3,wait untill Led show "0",push stop/reset four times;
4,push power twice.
finish
|
| Re: Canon MPC/Smartbase/Pixma INKTank FULL by lusi83 (10/4/06 3:22 AM) | + / - | I would not buy a new Canon printer. I have been told by Canon that all modern Canon printers - with a print head separate to the cartridges – are based on this design.
Firstly the print head will fail after a while -there are lots of methods on the web and in this forum to extend the print head’s life (things like cleaning with water and isopropyl alcohol-do this OFF THE MACHINE). Canon recommends using repeated ‘deep head cleaning’ on the printer before replacing the print head –AVOID THIS because of the more serious problem with these machines. Better just to try printing pages of junk (using genuine Canon ink).
Every time the print head is cleaned (frequently) and when ‘deep head cleaning’ you use some ink – this ink goes onto the waste ink absorber pad. This is basically some absorbent material in the base of the printer. You cannot access this without taking the WHOLE PRINTER to pieces, the printer keeps track of how many times ink goes onto the pad.
After a while it will decide that this pad is full and needs to be replaced. The printer will no longer work and show an error message. This pad can only be replaced by a Canon service centre…basically it is cheaper to buy a new printer. If you look around on the web, in this forum or can get hold of a Canon service manual (can be downloaded from the web -mine was £5) you will be able to reset the value and continue to use the printer BUT you do risk ink leaking out of the bottom of the printer (and may damage the purge unit). Probably best not to reset more than once. The ‘purge unit’ is the part that sucks ink into the absorber pad – and I guess that the tube feeding into the pad gets blocked with ink.
Canon are more than aware of the design fault – I would guess it would be pretty simple to design the units so that the ink pads are user replaceable (a flap on the base) and the reset is in user manual but for some reason(!) Canon haven't done this.
I’ve learned this from experience I did lots of deep head cleaning including using isopropyl alcohol in cartridges before replacing my print head (£40) and then immediately running into the waste ink pad problem – before I had found the info here about the reset - I took mine, a Smartbase MP360 to pieces and the pad was pretty full and yucky –I washed it, dried it and put it back and reset. I’m pretty sure my purge unit has failed, the tube at the bottom was sitting in the gunky ink(or possibly I damaged something else whilst dismantling) – it will be cheaper to get a new printer (not a Canon) then invest any more money in this one…
|
| Re: Canon MPC INKTank FULL by Anonymous (10/7/06 7:43 PM) | + / - | Need help for my canon MPC400 blingking alarm and error ##335
|
| Re: Canon MPC200 wrong cartridge? by Anonymous (10/13/06 7:34 AM) | + / - | pls help me how to solve ds damn problem..its been a week. pls mercy huhuhuhu
|
| Re: Canon MP F50 wrong cartridge error? by Anonymous (10/17/06 7:40 PM) | +3 + / - | I have a wrong cartridge error on my canon multi pass F50 can anyone tell me how to fix or clear error message. Cartridge is fine all have ink in them and appear to be installed properly. The message just came on one day and now I can not use the printer. Please help!
|
| Re: Canon mp360 paper jam by kestralsuper2003 (10/19/06 1:57 AM) | +2 + / - | keeps saying i have a paper jam and i haven't.Won't respond to any thing i do.Tried pressing the ok button millions of times can some one help me please.
|
| Re: Canon MPC INKTank FULL by ggggggg (10/20/06 7:14 AM) | + / - | i have an error of ##335 too, prevent me from printing!!!!!!!! HELP!!!!!!!!!!!
|
| INK TANK FULL by MP110 (10/24/06 3:40 AM) | +1 + / - | Hi, does anybody knows how to reset CANON PIXMA MP110???
Thanks!
|
| Re: Canon MP390 - cannot scan by Scannerless (10/27/06 5:43 PM) | + / - | Hello all. I have had this printer for a while now and never used the scan function until now. It has printed and faxed fine since I got it but I cannot for the life of me get it to scan.I have the USB cable connected, access to the MP toolbox screens but when I try to scan, it gives me a message that the computer cannot communicate with the scanner. Can anyone help me with this problem. Tks
|
| Re: INK TANK FULL by Anonymous (10/28/06 12:57 PM) | +1 + / - | Press MEMU ->SCAN ->COPY -> SCAN buttons in this sequence
and you are in the SERVICE MENU
Here you can reset printer MP110 and MP130
to FACTORY DEFAULT and much more
Jan_2teP
|
| Re: Re: Canon mp360 paper jam by Anonymous (11/1/06 2:13 PM) | + / - | I have the same problem please someone help us.
|
| Re: MPC 190 error #335 Waste Ink by renaat (11/5/06 9:13 AM) | + / - | Dear Cornelius,
After having a lot of trouble I found the menu you are refering to. I cautiously went through all the steps of the procedure, but in the end my MPC190 is still telling me that an error ##335 occurs. My machine still does not work !
Do you have any other explanation about the meaning of this code ? Perhaps I should try out something else.
Thanks anyway,
|
| Re: Canon MPC INKTank FULL by renaat (11/5/06 11:45 AM) | + / - | Dear Anonymous
After having a lot of trouble I found the menu you are refering to. I cautiously went through all the steps of the procedure, but in the end my MPC190 is still telling me that an error ##335 occurs. My machine still does not work !
Do you have any other explanation about the meaning of this code ? Perhaps I should try out something else.
Thanks anyway,
|
| Re: Canon MPC INKTank FULL by renaat (edited 11/10/06 3:32 AM) | + / - | Dear Anonymous and Cornelius
After resetting about every item in the menu of my MPC190 the error 335 did not disappear.
At last I removed the printing head. Then an I got the message : wrong cartridge. I have not changed any cartridge, the cartridges are not empty and they are guinine Canon cartridges. Any suggestions ?
If the problem cannot be solved quickly, I'll have to buy an other machine, but it certainly will not be a Canon ! I can get a HP for only 82.5 € Or a Dell for 83 € (home delivered).
Greets
|
| Canon MPCI190s by MLcomputer (11/7/06 8:17 PM) | + / - | Dear Friends,
I have problem with my printer canon Imageclass MPC190 and its shown error ##335. The message say "check printer, Press Resume Key". I did press resume key but nothings change.
I would be very grateful to get help on my problem.
Thanks in advance
|
| Canon MPCI190s by MLcomputer (11/7/06 8:20 PM) | + / - | Dear Friends,
I have problem with my printer canon Imageclass MPC190 and its shown error ##335. The message say "check printer, Press Resume Key". I did press resume key but nothings change.
I would be very grateful to get help on my problem.
Thanks in advance
|
| Re: Canon MPC INKTank FULL by canon multipass (11/9/06 1:38 AM) | + / - | Hello !
My canon Multipass c75 posts this problem :
Check Printer ( German: DRUCKER PRÜFEN )
##348
How can i fix this problem ? Thanks
|
| Re: Canon MPC INKTank FULL by renaat (11/10/06 3:28 AM) | + / - | To all people with error 335 : Canon service center send me an answer !
"It seems that the printer unit is out of order. We advise you to turn in your printer to a service center for repair."
In other words : throw away your machine and by an other one.
Greets !
|
| Re: Re: Canon MPC INKTank FULL by bobby 6 (11/14/06 9:39 AM) | + / - | I need a service manual fo canon mp160.
If you want, send me by mail a service manual for this printer
Thanks!
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (11/16/06 4:55 AM) | + / - | I need manual service to reset a Canon Pixar MP150.Tanks.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (11/16/06 4:57 AM) | + / - | I need manual service to reset a Canon Pixma MP150.Tanks.
|
| Re: Re: Re: Canon MPC INKTank FULL by Anonymous (11/23/06 1:09 AM) | + / - | 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Turn off the printer.( it must be turn off)
then turn it on again. this works. thanks.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (11/24/06 5:10 PM) | + / - | mas ada ga cara manualnya ngereet printer canon mpc 190 tolongin donk plzzzzzzzzzzzzzzzzzzzzzzz.....! !!!!!!!!!
|
| Re: Re: Canon MPC INK NEAR FULL by Anonymous (11/28/06 9:09 PM) | + / - |
i have a problem with my canon mpc190s printer,,
and do'nt know how to solve it,,
pls can you help me,, the error was, WASTE INK NEARFULL;
i try to reset but it's not working, REGISTRATION FAILED is
appear
|
| Re: Re: Canon MPC INKTank FULL by belna (12/2/06 8:39 PM) | + / - | Dear anonymous,
Please show me the steps on how to fix my mpc190 printer ink tank near full
Thanks
belna
|
| Re: Servic Mode MP360 by Anonymous (12/8/06 2:13 PM) | + / - | Thanks a lot, you saved my printer (a canon mp390)! Now it works correctly and I think I have time until it displays again "check printer" ; "##343" :D !
|
| Re: Re: Canon MP150 cartrigde led (both) blink orange by Anonymous (12/12/06 11:17 PM) | + / - | how reset inklevel mp 150
|
| Re: Re: Canon MPC INKTank FULL by abberger (12/21/06 5:09 AM) | + / - | Hello
Can you sende the service manual for the canon mp150 printer to the email juergen.abberger@gmx.de, please.
Thanks Jürgen
|
| Re: Re: Canon MPC INKTank FULL by abberger (12/21/06 5:11 AM) | + / - | Hello
Can you sende the service manual for the canon mp150 printer to the email juergen.abberger@gmx.de, please.
Thanks Jürgen
|
| Re: Re: Re: Canon MPC INKTank FULL by Anonymous (1/1/07 1:49 AM) | +1 + / - | Wrong Cartridge problem flashing light won't stop.
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (1/11/07 1:25 AM) | + / - | tolong informasi dimana bisa dapat program untuk reseter canon mpc190s
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (1/11/07 3:02 AM) | + / - | This procedure is a bit vague but it goes something like this:
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu Copy Copy Copy Scan
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
|
| Re: Re: Re: Canon MPC INKTank FULL by Cornelius Goh (1/12/07 8:08 PM) | + / - | Hi Anonymous, the correct "Reset Waste Ink Code" commands should be Menu Copy Scan Copy Copy, not Scan at the end. Please read below and my posting in 6/25/2006.
Procedure B) Reset Waste Ink Code
1) Enter SERVICE MODE by pressing sequentially Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Press '+' 8 times till 'Select [8]' PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
8) Done
Canon is a great printer in terms of color quality and price. But it is a 'pain in the A**' when fixing the printer :)
Nevertheless, the MPC190 is still my best printer amongst my other 2 printers HP and Epson. The ink cartridge is 50% or more cheaper than HP's, and the Canon color photo papers print out beautifully from my MPC190 using the color Print Photo Software.
Cornelius Goh
Singapore
|
| Re: Re: Re: Canon MPC INKTank FULL by Cornelius Goh (1/12/07 8:11 PM) | + / - | Hi Anonymous, the correct "Reset Waste Ink Code" commands should be Menu Copy Scan Copy Copy, not Scan at the end. Please read below and my posting in 6/25/2006.
Procedure B) Reset Waste Ink Code
1) Enter SERVICE MODE by pressing sequentially Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Press '+' 8 times till 'Select [8]' PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
8) Done
Canon is a great printer in terms of color quality and price. But it is a 'pain in the A**' when fixing the printer :)
Nevertheless, the MPC190 is still my best printer amongst my other 2 printers HP and Epson. The ink cartridge is 50% or more cheaper than HP's, and the Canon color photo papers print out beautifully from my MPC190 using the color Print Photo Software.
Cornelius Goh
Singapore
|
| mp110 INK TANK FULL by Anonymous (1/13/07 10:57 PM) | +1 + / - | Press MEMU ->SCAN ->COPY -> SCAN buttons in this sequence
and you are in the SERVICE MENU
Here you can reset printer MP110 and MP130
to FACTORY DEFAULT and much more..
i can go 2 d service menu oredi but wer can i reset d waste ink ??
can teach me more bout tis??
thanks...
|
| Re: Re: Canon MPC INKTank FULL by Anonymous (1/15/07 11:59 AM) | + / - | hi.ineed help for you.i have a canon mp 170 and i need a service manual for this.(for enter in service menu)thank in advice for help.
|
| Re: Servic Mode MP360 by Yogi (1/31/07 3:30 PM) | + / - | your post was fantastic. solved my problem. you wouldn't know how to clean the waste ink pad would ya? cuz now that my printer is reset i thought it might be a good idea to clean that since it seems to be the source of the problem.
|
| |
