Can anyone help me to find the adjustment program for my Epson Stylus Photo 700 ?
I'm not looking for drivers or reset catridge utilities. I'm lookin for the Adjustment Program I can't found this in any search engine, eMule or froum, and the site sugested in this forum (http://www.otd.com.ua) don't have nothing, is empty.
Pls.
info@pccasting.com
Re: EPSON Adjustment Program by Julio (10/13/04 4:55 PM)
What exactly are you trying to do with the adjustment program? Best I can tell the only adjustment program is for the epson color 3000. The 700 comes with a printer driver and printer utilities software that should provide you what you need.
Here is the link to the color 3000 adjustment program: fileshare.eshop.bg
Re: EPSON Adjustment Program by Wes (10/13/04 5:26 PM)
Julio: I'm guessing you might be talking about the WASTE INK COUNTER RESET PROCEDURE. If so, then you might want to check out the "SSC UTILITY", at http://inkjetprinterhelp.us/epsonSSC.html . That utility has several options that you can check into. Unfortunatly, that "SSC Service Utility" does not work on all Epson Printers and not on all Operating Systems and sometimes will not even work on actually listed printer models, so you will have to check it out for yourself...The only other source for a FREE RESET PROCEDURE [that I know of] is one posted earlier by WES on this Printer Repair Site: www.resetters.com . Because that site is actually a Russian Site, it is of course hard to figure out. You will probably need to use sime type of TRANSLATION PROGRAM, such as "ImTranslator/PROMT Online", at http://www.paralink.com/ims/ , just to be able to try and use it...Good Luck! Denny Conway
Re: EPSON Adjustment Program by Denny Conway (10/13/04 5:35 PM)
Julio...FOLLOW-UP TO FIRST REPLY: I just checked and there is a free "Stylus Photo 700 and EX Service Manual.rar", located at www.eserviceinfo.com . You will have to actually download it and then see if it contains the Adjustment Program that you are looking for...Denny Conway
Re: EPSON Adjustment Program by Julio (10/14/04 4:20 AM)
I don't need reset, I don't need clean, I don't need the Service Manual, etc., etc,.. please, not insist with the SCC program or any other suggestions like this.
I'm ONLY need the EPSON Adjustment Program.
I change the head of my printer and I need to align this with the EPSON Adjustment Program and this is the only way. I have the Epson service manual but don't have the Adjustment Program for the Stylus Photo 700 and I can't found it.
Please, any body can help me with the right answer. I don't want pay for download this software.
Thank you.
Julio info@pccasting.com
Re: EPSON Adjustment Program by willie (10/14/04 9:18 AM)
nevertheless, www.resetters.com/downloadfiles.php has old (win 95 and 98) adjustment programs for free, but not for your specific printer, sorry about it
que la suerte te acompañe
willie
Re: EPSON Adjustment Program by Julio (10/14/04 4:44 PM)
Poupoulos: Unfortunatly, all the Service Utilities that I am aware of, work on the Windows Operating System and seem to work best on Win's 98. If no once else comes up with anything different: I just wanted to let you know that you might have to install your printer on a Win's Computer System [like a friends], download printer drivers from Epson Company, use your printer cable to connect your printer to their system and then try the Service Utility Program you need...Denny Conway
Re: EPSON Adjustment Program by Audray (10/21/04 6:01 PM)
Hey Guys I hope you can help me also, i have a Epson Stylus Pro XL and i am looking for the adjustment program as my print heads need aligning. I have installed the printer on a Win98 Box and installed the driver from Epson's Web site. However it does not contain the calibration utility. any ideas where i might find this? Thanks
Re: EPSON Adjustment Program by Apo (11/1/04 12:49 PM)
I am looking for a free download of the Epson c20 adjustment programme to reset the waste ink counter. I have tried several web sites but find nothing of use...Any help please...?
Re: EPSON Adjustment Program by Denny Conway (12/6/04 10:45 AM)
John: ESI offers downloads of a free SERVICE MANUAL for your "C20". I don't know if that manual includes the actual reset procedure, or not, so you will have to check it out yourself. You can see that available Service Manual [which apparently is in 5 separate downloads from ESI, by clicking on the following links: http://www.eserviceinfo.com/downloadsm/1378/Epson_C20_C40.html & http://www.eserviceinfo.com/downloadsm/1379/Epson_C20_C40.html & http://www.eserviceinfo.com/downloadsm/1380/Epson_C20_C40.html & http://www.eserviceinfo.com/downloadsm/1381/Epson_C20_C40.html & http://www.eserviceinfo.com/downloadsm/1381/Epson_C20_C40.html . Although the last two links appear to be the same address, they will take you to a different download. If that available service manual, does not actually contain the reset procedure, then you can see if the "SSC Service Utility" will work on your particular printer. Unfortunatly, that "SSC Service Utility" does not work on all Epson Printers and not on all Operating Systems and sometimes will not even work on actually listed printer models, so you will have to check it out for yourself. Just in case that source does not work: You may actually need to go on-line to try and locate the actual "RESET PROCEDURE", to buy and download for reference. I have not checked, but you can normally find Reset Procedures for most Epson Printers, from 2manuals.com, at http://www.2manuals.com/index.php?cPath=2_18 . The reset Procedure is usually available from that source, for around $10.00 [ /-]...Good Luck! Denny Conway
Re: EPSON Adjustment Program by mee (12/9/04 6:02 PM)
Wagner: There is a "Stylus Color 600,640,660 Printers Service Program", available to buy and download for around $5.00, from 2manuals.com, at http://www.2manuals.com/product_info.php?cPath=1_56_50&products_id=204 ...REMEMBER: That "Maintenance Request Error" is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see "Exploded Parts Diagrams" of most Epson Ink Jet Printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water, then dry them out and simply reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that Waste Ink Counter reset procedure and performing it first, to make sure your printer will then work...Good Luck! Denny Conway
Re: EPSON Adjustment Program by John Gunnng (12/13/04 1:02 PM)
Hi Denny, Thanks for the reply. I have located a full free service manual and found a link to the Adjustmant Programme - and all is fine. many thanks, Regards, John
EPSON Adjustment Program by riffe (12/14/04 10:51 PM)
Anyone can help me with a EPSON Adjustment Program for SC480.
I have taken out and cleaned the printer head with warm water after the ink was foound to have dried out. After installing it back with refilled ink, I used the Epson service program and power cleaned the heads, it print with no ink out.
Thanks in advance Ricky
Re: EPSON Adjustment Program by Julio (12/15/04 6:30 PM)
Atomic...Thanks for the update, but just to let you know: That "SSC Service Utility" has been available for quite awhile and mentioned often on this Printer Repair Site. Unfortunatly, that source does not work on all Epson Printers and does not always work on all Operating Systems. From previously posted replies, it seems that the SSC Service Utility, works best with Win's 98. Sometimes it will not even work on actually listed printer models, so people will have to just check it out on their particular Epson Printer. Just in case that source does not work: They may actually need to go on-line to try and locate a "SERVICE MANUAL" and also the actual "RESET PROCEDURE", to buy and download for reference in disassembly, troubleshooting and servicing. I have not checked, but you can normally find Service Manuals & Reset Procedures for most Epson Printers, from 2manuals.com, at http://www.2manuals.com/index.php?cPath=2_18 . Most Service Manuals can usually be downloaded for around $10 [+/-]. The reset Procedure is usually available from the same source and is also around $10.00 [+/-]...Denny Conway
Re: EPSON Adjustment Program by MARK (1/24/05 4:10 PM)
Dino: A Service Error where you get an "Unknown Error Message", or a "General Error Message", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see "Exploded Parts Diagrams" of most Epson Ink Jet Printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water, then dry them out and simply reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that Waste Ink Counter reset procedure and performing it first, to make sure your printer will then work...THIS ADDITIONAL INFO MIGHT ALSO BE OF SOME HELP: Tim H 12/10/2003 2:46:24 Subject: Epson Reset Program Download Location. after a long search for a reset program for waste ink, without paying, i found it. goto: http://inkjetprinterhelp.us/sscserve.exe . please check that your printer is compatible goto: http://inkjetprinterhelp.us/epsonSSC.html . this program has other features as well...Unfortunatly, that "SSC Service Utility" does not work on all Epson Printers and not on all Operating Systems and sometimes will not even work on actually listed printer models, so you will have to check it out for yourself. Just in case that source does not work: You may actually need to go on-line to try and locate a "SERVICE MANUAL" and also the actual "RESET PROCEDURE", to buy and download for reference in disassembly, troubleshooting and servicing. I have not checked, but you can normally find Service Manuals & Reset Procedures for most Epson Printers, from 2manuals.com, at http://www.2manuals.com/index.php?cPath=2_18 . Most Service Manuals can usually be downloaded for around $10 [+/-]. The reset Procedure is usually available from the same source and is also around $10.00 [+/-]...Good Luck! Denny Conway
Re: EPSON Adjustment Program for LX300 dot matrix by nand kishore son (2/1/05 8:23 AM)
Anonymous: If its the actual Printer Drivers that you need and you actually have the "C40UX" model, then you can go on-line to the Epson Support web-site, for Drivers & Downloads, at http://www.epson.com. Simply read all the info and make your choices, to download those particular drivers...If you have the "C40S" model, then go on-line to the Epson Support web-site, for Drivers & Downloads, at http://www.epson.com. Again, simply read all the info and make your choices, to download those particular drivers...Good Luck! Denny Conway
Required EPSON Adjust. Prog for Stylus Color 400 by G Babu (2/7/05 8:40 PM)
If anyone has already used the program, could you tell me what destination do I have to choose, when the program asks me to do so. I don't really think the abbreviations are self-explanatory; I live in Europe (Austria, Vienna). I looked for any hints in the handbook or on the printer itself, but none of the abbreviations used in the program's dialogue appears anywhere.
Regards, Thomas
Re: EPSON Adjustment Program by adent (2/8/05 7:59 AM)
A big 'thank you' to all the contributors to this site, especially Denny Conway. By reading your advice and then downloading the freeware from http.inkjetprinterhelp.us/epsonSSC.html I have just re-set my waste ink pad counter on my Epson Stylus C42plus. Obviously I now have to clean and dry the pads but this has saved one printer from going in the bin and kept our planet a little cleaner.
Best wishes to you, Peter (Manchester - England)
Re: EPSON Adjustment Program by Denny Conway (2/14/05 9:29 AM)
Peter: I am glad that we were able to help you to get your printer up and running again. Good job on using that SSC Service Utiity, to clear your printers Wasre Ink Pad Error Condirion...Denny Conway
Re: EPSON Adjustment Program by Peter (2/14/05 9:50 AM)
Denny: Thanks for your comments. I took the waste pads (two pieces) out of my printer. This was easy to do using a sharp skewer to hook them up. I rinsed them under running cold water. This took a while until all the ink was squeezed out. (Hint: wear protective gloves if you don't want stained fingers) I dried the pads on a radiator for a day and then re-fitted them. Everything is working well. I have passed this information on to a number of my friends and they are very grateful for the advice - especially the freeware. Thanks again, Peter (Manchester - England)
Re: EPSON Adjustment Program by G Babu (2/14/05 10:05 AM)
G Babu: There is an Epson "Stylus Color 400, 440, 460 Printers Service Program", available to download from 2manuals.com, for around $5.00, at http://www.2manuals.com/product_info.php?cPath=1_56_50&products_id=200 ...If you are trying to actually reset the "Internal Waste Ink Counter", then the following previously posted info, might help: Tim H 12/10/2003 2:46:24 Subject: Epson Reset Program Download Location. after a long search for a reset program for waste ink, without paying, i found it. goto: http://inkjetprinterhelp.us/sscserve.exe . please check that your printer is compatible goto: http://inkjetprinterhelp.us/epsonSSC.html . this program has other features as well...TECH NOTE: Unfortunatly, that "SSC Service Utility" does not work on all Epson Printers and not on all Operating Systems and sometimes will not even work on actually listed printer models, so you will have to check it out for yourself. If that source does not work for you, then you may actually need to go on-line and buy and download that actual "Reset Procedure"...Good Luck! Denny Conway
Re: Re: EPSON Adjustment Program by Anonymous (2/18/05 7:00 AM)
Hello Benwong, I hope you're still reading this forum? :-) As an owner of Epson Stylus Photo 700, I'm highly interested in mentioned service program. Would you mind sending it to me? Thanks, Artur
Re: Re: EPSON Adjustment Program by Archie (3/23/05 12:20 AM)
I don't think you're correct. There's many free things in this world, and many people wanting to help others - not for money, but just to make that world better! ;-)
To all: Problem resolved - I've got mentioned program. Thanks everyone, and have a nice day!
Artur
Re: EPSON Adjustment Program by Ezekial (3/26/05 12:30 PM)
Ezekial...Just to let you know: There are only two cleaning solutions that should be used on Epson Printheads. "Distilled Water" and the "Epson Printhead Cleaning Solution". Most other cleaning solutions and cleaning cartridges simply do not usually work, or can even cause possible damage. The reason I push the kit sold by FYOP, is that its the correct solution to use and is relatively inexpensive. People are using this FYOP Printer Repair Site, for the free help that it provides. It only makes sense, to buy products that you may need to use on your printer, from that same site that is giving you that free help. To me, its simply a way to help support the FYOP repair site, so that they can provide that free help. You don't have to buy the FYOP products, or even accept the free help and advice that you are given. You can even pay the actual manufactor for technical support [if your printer is out of warranty], that does not usually help as much as the free help you get from FYOP. Thats always your choice...NEWUSER is right, about about me not working for FYOP. I simply volunteer to help on this Printer Repair Site, in my free time, as a way to help people with Epson Printer problems, when I can. I am actually employeed by an "Epson Authorized Service Dealer", as a printer repair technician. Sometimes I'm legally limited by Epson Company, as to what information that I can release and the help that I can give, but at least I try to help...Denny Conway
Re: Re: EPSON Adjustment Program by Archie (3/28/05 11:46 PM)
Hi Denny, Concerning printhead cleaning: what do you think about adding some ammonia to the distilled water to be used for cleaning? I've found such recommendation: === http://www.inkjetart.com/tips/cleaning.html A better solution is a mix of distilled water, household non-sudsy ammonia, and cheap vodka. === Is it worth trying? I'm not sure whether it's safe for the printhead, but it seems that clean water isn't enough in my case (heavily clogged head)... Cheers, Artur
Re: EPSON Adjustment Program by Denny Conway (3/29/05 9:09 AM)
Artur: I don't recommend using any cleaning solutions other than "Distilled Water", or the actual "Epson Printhead Cleaning Solution". Ammonia, as well as most other cleaning solutions, can actually cause damage to the printhead assemblies in Epson Printers. You might want to try using the Epson Stylus Head Cleaning Solution, available through fixyourownprinter.com, at http://www.fixyourownprinter.com/kits/epson , but it will only help, if there is an actual clogged printhead assembly. When it opens, click-on "Epson Stylus Head Cleaning Solution" thats listed for your particular printer. The Epson solution sells for around $10.00 plus shipping. It includes a syringe and some Epson printhead cleaning solution, which is designed to dissolve most clogs, especially if you were using Epson inks. This is the same chemical used by Epson in their service department. You can try it if you want to and see if you can get the printhead nozzles to open up again, but that will only help if they are actually clogged. It was basically designed by Epson Company for use on their older models of ink jet printers, but people have been using it on the newer models, with success reported. IF YOU DECIDE TO, TRY THE "EPSON STYLUS HEAD CLEANING SOLUTION", JUST REMEMBER: The "nozzles" inside the printhead assembly can be easily damaged by using to much force on the plunger of the syringe. Damage can even occur when you are using the Epson Stylus Head Cleaning Solution method, if you actually try to force the fluid thru the nozzle. To much force/pressure can damage the little tubes inside the Nozzle Assembly and then it will never work again. One individual printhead nozzle is so tiny, that it will not accept a human hair. You can see why they can get clogged so easily, or even why the nozzles can be so easily damaged. The correct method is to use the syringe to add the fluid into the nozzle and then leave the fluids set inside the nozzle for a day or two, to try and dissolve a possible bad clog. If you remove the "Top Cover Assembly", then you can leave the printhead assembly parked in its normal home position, at the far right side. Then any ink & fluids that are purged during the cleaning, will normally travel thru the cleaning station hoses, to the waste ink pads. If you have the "Print Cartridge Holder Assembly", positioned away from the home position, then you will need to slide strips of paper towels or coffee filters under that assembly, to soak up any expelled ink and fluids, or it can get all over. Sometimes you might have to use the fluids several times to be able to dissolve the clog in the printhead nozzles. Sometimes the clog will never dissolve, or it actually damages the nozzles. The longer the clog has been in, the worse it is to remove. Again, if the cleaning fluids don't help, then its generally time to invest in a new printer. In some more expensive printers, you may want to get an estimate to replace the printhead assembly, but as a general rule, its not really economical to do in the smaller Epson Ink Jet style printers. You can generally buy a new small printer cheaper than you can have your old one repaired for. EXAMPLE: The printhead assembly in the "C80" Printer sells for around $120 to $130. There is a REVIEW of the "Printhead Cleaning Solution", as well as general "Printhead Cleaning Instructions", that is available to view at http://www.inkjetprinterhelp.us/EKR.html ...Good Luck! Denny Conway
Re: Re: EPSON Adjustment Program by Archie (3/29/05 11:29 PM)
I'll report whether it worked or not. I'd want to repair my SP700, because it ideally suits my needs - I use both Mac and PC at home; they're old machines (Mac is Quadra-950 with serial interface), so it's a bit difficult to buy a new printer with RS-422 connection nowadays! ;-)
WBR, Artur
Re: EPSON Adjustment Program by Denny Conway (3/30/05 10:42 AM)
Well, I've got the result: after cleaning of the head, putting new ink cartridges and performing "Ink Charge" and "Head Cleaning" routines, it worked for short time, and then stopped again... :-(
It looks like something is blocking ink delivery to the nozzles IMHO. During cleaning, I used the syringe loaded with warm distilled water, and I'm sure all the nozzles are open - I can see good row of jets from each color: all of them are working. After performing "Ink Charge", I see traces of all the colors on the suction pad.
But on actual printing (either "A4 Test Pattern" from ajustment program or particular file), there's missed dots and white strips on the paper, and with every subsequent page it's getting worse - after printing seven sheets, the page is almost completely blank...
Any more recommendations?
Thanks, Artur
Re: EPSON Adjustment Program by Denny Conway (4/4/05 11:10 AM)
Arthur: As you installed new ink cartridges, I would have to guess that the print heads are probably still partially clogged or starting to fail, especially as there are actual white lines or void lines showing up on the nozzle test pages. If the actual print heads are not clogged, then either the ink cartridges are going bad, the print heads are starting to fail, or there is some other hardware/parts related failure. If after installing those new ink cartridges, the nozzle tests actually printed out and looked ok, with all nozzles printing, that would usually indicate that there was no actual clogging involved. Of course if those new ink cartridges that you installed, happened to be Non-Epson Ink Cartridges, then there is a slight chance that those Generic or Third-Party ink cartridges could still be causing problems. Depending on how many sets of "print head cleaning cycles" & "nozzle tests" that you ran [after installing those new ink cartridges], its even possible that those cartridges may actually be low on ink and causing problems. Running a lot of "print head cleaning cycles" and "nozzle tests" can use up the ink inside those new ink cartridges. On some models, you could install a new cartridge and run between 10-15 cleaning cycles and tests and its possible to empty the new cartridge. However, if some of those nozzles are not open, when you run an actual nozzle test page, then I would still guess that they are probably clogged. Its also possible that they are simply not firing, but that would indicate a failing print head assembly...Denny Conway
Re: EPSON Adjustment Program by newuser (4/4/05 11:10 AM)
Denny, Newuser: I've always used the original Epson cartridges on that printer, and this last set of inks installed after cleaning is a genuine Epson as well. I don't think printhead is still clogged, as I saw water jets fountaining from every nozzle during cleaning, and there's enough inks of each color in tanks - so, it seems that it's indeed head electrical failure or the air blockage... If latter, how it's possible to get rid of air? Concerning the inks: what's wrong with using third-party inks, except for possible head clogging? It seems that now I have nothing to loose, so perhaps it's better to use cheap compatible inks for experiments and endless 'Head Cleaning' cycles? ;-) Thanks again, Artur
Re: EPSON Adjustment Program by Denny Conway (4/5/05 10:17 AM)
Archie...Reguarding Non-Epson Inks & Ink Cartridges: Unfortunatly, not all "Generic" & "Third-Party" ink cartridges are made the same and none of them actually contain the right formulation of ink, for the Epson Printers [formula is patented by Epson Company]. Some are probably close and seem to be better than others, but some simply can clog-up or even damage the "Printhead Assemblies" on epson printers, especially the newer models made with-in the last few years. I understand the differences in the costs of the non-epson ink and ink cartridges, compared to the actual epson ink cartridges and the choice is always yours to make. It really does not matter to me what type of ink cartridges you decide to use in your epson printer, but I do feel you should know that its actually the wrong ink and can cause possible problems in Epson Printers. JUST TO LET YOU KNOW: Epson ink jet printers are one of the few printers on the market that seem to have so many problems with non-manufactors inks. Epson printers use a completely different printhead inking system than most other brands of printers and correct epson ink formulation is vital. Those printheads are one of the reasons that the epson printers make such quality color prints, that so many people rave about. Epsons "Micro Piezo Ink Jet Technology" and the ultrafine 4-picoliter ink droplets used in most of the epson ink jet printers, just don't always work well with non-epson inks. Most, if not all of the other manufactors, use thermal or bubble jetprint heads and because the other brands use a totally different system, they don't seem to have as many problems using refilled inks or non-manufactor's ink cartridges. There are people that say they use "Generic" or "Third-Party" inks or ink cartridges in their epson printer and have never had a problem, but I've seen and read about too many problems caused by using non-epson ink. No matter what anyone says, all blacks and colors are not the same. Printer manufacters do not make available their ink formulation and in most cases, the formulation is patented. Any difference in the ink formulation can clog the small printhead nozzles or damage other critical components. One individual printhead nozzle is so tiny, that it will not accept a human hair, so you can see why they can get clogged so easily, or even why the nozzles can be so easily damaged. epson has many different formulas just for its black ink, for all the different epson printers, let alone for their colored inks. Generally if you are using non-epson ink or ink cartridges, or refilling your old cartridges, you are using the wrong ink for your printer and sooner or later you will have some type of problems, almost everyone does. You are taking your chances by using third-party or generic ink cartridges, or even by refilling your old cartridges...Reguarding possible nozzle damage during syringe cleaning: The nozzles inside the printhead assembly can be easily damaged by using to much force on the plunger of the syringe. Damage can even occur when you are using the epson stylus head cleaning solution method, if you actually try to force the fluid thru the nozzle. To much force/pressure can damage the little tubes inside the nozzle assembly and then it will never work again. One individual printhead nozzle is so tiny, that it will not accept a human hair. You can see why they can get clogged so easily, or even why the nozzles can be so easily damaged. The correct method is to use the syringe to add the fluid into the nozzle and then leave the fluids set inside the nozzle for a day or two, to try and dissolve a possible bad clog...Denny Conway
Re: EPSON Adjustment Program by Denny Conway (4/5/05 10:23 AM)
Archie: DURING A PRINTHEAD CLEANING CYCLE OR EVEN A NORMAL PRINTING CYCLE: The pump in the Cleaning Station Assembly, actually creates a vacuum [thru pumping action] which pulls the ink from the Print Head Nozzles, thru the felt Cap Assembly, thru the hoses and onto the Waste Ink Pads, where it is absorbed. REMEMBER: NO PUMPING ACTION = NO INK FLOW & NO VACUUM = NO INK FLOW. A LOSS OF PUMPING ACTION OR A LOSS OF VACUUM CAN HAPPEN WHEN: The pump quits; hoses get clogged; the hoses come off; the hoses get crimped/pinched; springs under the cap assy fall off; the cap assy comes unhooked from its mounting points; the cap assy gets so dirty [build-up of dust, dirt, lint, hair, etc.] that it fails to seal correctly. Generally speaking, the pump seldom fails but after a year or two of steady use, the capping assembly and head may need some attention. REMEMBER: If the felt cap assembly, with the rubber seal/ring around it, does not seal under the printhead assembly correctly, then the vacuum is lost and no ink is pulled thru the nozzles. Check for an e-mail from me, with some additional info in that area...HERE IS SOME GENERAL INFORMATION ON THE "CAP ASSEMBLY" [felt pad] AND "CLEANING BLADE ASSEMBLY" [rubber type blade], WHICH ARE BOTH PARTS OF THE "CLEANING STATION ASSEMBLY" : When the "print cartridge holder assembly" is parked in its normal home position [far right side of the printer], the cap assembly is directly under the printheads. The cap assy is easy to identify, because it is a rectangular shape, with a rubber lip/ridge around an inner felt pad. This felt pad usually has stripes of all four colors of ink on it [which is often referred to a "Rainbow Pattern" effect]... TECH NOTE #1: Some models of Epson printers have two seperate cap assy's, one for the color printhead assy and one for the black printhead assy...TECH NOTE #2: REMOVE THE "TOP COVER ASSY", to be able to service that assembly and surrounding area...The "cap assy" is mounted into a plastic holder assembly and is sometimes referred to as: capping mechanism. The cap assy not only seals the printheads when not in use [prevents ink from drying out/thickening/clogging], it also creates a vacuum seal around around the printhead, which enables ink suctioning to take place. No suctioning, no proper ink flow: results in poor printing, or no printing. There is a taller piece of plastic ["plastic bar"] standing up, to the rear end of the cleaning station assembly, just to the right of that felt type cap assembly. Its on the top side of this assy [kind of like a short flag pole]. This "plastic bar" is what the entire "print cart holder assy/printhead assy" pushes against [as it is moved along by the carriage assy] when it returns to its normal home position. With the top cover removed, you can maually [once its unlocked] slide the "print cart holder assy" in and out of its home position and actually see this "plastic bar" being pushed back-n-forth. If you then slide the "print cart holder assy" over to the left side of the printer, you can manually push against this "plastic bar". Now you can see where a spring causes that assembly to move back-n-forth. You can see the surrounding assy move back-n-forth as you push on the "plastic bar"... REMINDER: Most of the "cleaning station" parts have wet, black ink on them. If those parts/assy have not been recently cleaned, when you touch something, you'll probably get ink on your fingers and hand. You can wipe off wet [or dry ink], with water and Q-Tips fairly easily, as most inks are "water soluable". Its a good idea to use wet Q-Tips to wipe off any excess ink from around that rubber lip that surrounds the felt pad/cap assy, so it can make good contact as it does its sealing process. Just to the left side of the cap assy sets a rubber "cleaning blade", but it is usually partially pulled towards the front of the printer and away from the cap assy and is hard to always see. This cleaning blade moves forward to clean off the bottom of the printhead assemblies during normal printer operation and when running the "printhead cleaning cycle/routine". You can push the cap assy to the right with that plastic lever that is standing upwards and if you use a small flat screwdriver, you can push the cleaning blade forward for cleaning. Once the blade is out, you can release the cap assy and it will just push against the cleaning blade. Using damp Q-Tips clean all around the cleaning blade and the cap assembly. As those two parts are involved with the actual cleaning routine, you want them to be clean. Once that cleaning station assy is fairly clean you can do a pumping test to check the printers pumping routine, if you want to...Denny Conway
Re: Re: EPSON Adjustment Program by Anonymous (4/5/05 3:06 PM)
The pump mechanism is working fine. I've completely disassembled & cleaned it - and I can see it actually sucking the inks during cleaning cycle.
I see what you mean concerning non-Epson inks; till now, I've always used original ones, but currently I just want to avoid unnecessary wasting of money until the printer will be repaired, or considered to be dead... Perhaps, I'll add some distilled water into the tanks - as I understand, it's better than using 'fake' inks with unknown chemistry?
One more question: if I've damaged the nozzles by using too much pressure from syringe, how it should look like then? Is that damage internal (e.g., the firing piezoelements or innner tubes are destroyed), or the opening hole of nozzle becomes damaged? I mean, is it possible to determine whether the nozzles were damaged or not? If I see row of water jets coming from the nozzles during cleaning, I suppose the inner tubing is Ok? And moreover - immediately after the cleaning, most of nozzles worked, but stopped firing later (during repeated test prints); does that mean that 'firing' elements are still in working condition, while actual reason of failure is something else?
Best wishes, Artur
Re: Re: Re: EPSON Adjustment Program by Archie (4/5/05 3:29 PM)
Arthur: Nozzle damage from to much pressure applied to the plunger of a syringe, is inside the actual print head assembly and is not visable. Usually, the tiny hoses to those nozzles get blown off by excess pressure and then the nozzle cannot print out any ink. There is no way to really determine if those nozzles are actually damaged or not, that I know of. They either work or they don't. If they are not actually clogged, but still do not print, then you can assume that they have failed. If the nozzles were actually working for awhile, but then stopped working, its also possible that the firing signal from the Main Board Assembly is failing, which would mean replacing that board. Basically, electrical signals from that board, tell each nozzle when to fire, which results in ink printing. Either way, a failing print head or failing main board, is not ecomomical to replace...Denny Conway
Re: Re: EPSON Adjustment Program by Archie (4/5/05 5:10 PM)
joni: I work on the actual printers, but not on computer systems or their related software. So I'm sorry, but I do not actually know. If its an actual file that comes on the software for the actual printer, then you might want to check with the "Epson Technical Support Department" and see if they can actually help. phone. You can e-mail the "Epson Technical Support Department", for possible free help or advice, at http://www.epson.com and then click-on "Proceed With E-Mail". They state on their web-site, that they "will respond via e-mail within 1 business day". You can also call the epson technical support department, but if your printer is out of warranty, you will need a credit card before the technicians can help you, because there is a charge for technical support over the phone. To see available phone numbers for technical support, go on-line to Epson @ " http://www.epson.com ", or call the Epson Automated Support Locator @ 1-800-442-2110 [press 1, then 1 & following prompts]...Good Luck! Denny Conway
Re: EPSON Adjustment Program by paul123456 (5/31/05 8:48 AM)
has someone of You the Epson Adjustment Program for the printer "Epson Stylus Photo 890". I looked into your forum and tried some links, but I couldn't find the right one.
Thank You for any help.
Best regards from Austria Markus
Re: EPSON Adjustment Program by BodyIllusions (6/9/05 7:23 AM)
**** Does anyone have the Epson CX4600 Adjustment program?
I have searched high and low, and it seems there doesnt seem to be any adjustment software to reset the ink waste protection counter for this printer. Is there anyone who owns this multifunction printer, or knows how to reset this counter? I have looked everywhere, but there has got to be an Epson Pro in here somewhere that can help me.
Please email me the Adjustment Software for the CX4600 if anyone has it, be glad to return the favor in anyway I can. Thanks.
Please email to: bodyillusions(at)start.ca
Re: EPSON Adjustment Program by ad1412 (6/9/05 7:52 PM)
I use Epson C65 printer. I reset counter by SSC , I reset Yelow color, Black color..... Then, It works. But when I print any picture, the blue color changes Violet?!I I press 'Print test Pape' results the same! I clean heading eveything ok! The blue color --> The blue color. I think may be EEPROM??! What about u? Anyone has file to write EEPROM??pls help me??
Re: Re: EPSON Adjustment Program for LX300 dot matrix by Anonymous (6/23/05 9:34 AM)
Me, too. I would like Adjustment software for Epson CX4600 I have continuous ink system and it is doing head cleaning before every print job. It just started doing the All lights flashing except Error and Ink lights continuous with and E displayed in the copies display. I presume it means it needs to have ink pad counter reset. I checked the pads. They are almost clean. Daily, I have been absorbing ink with paper towel from the sponge.
I hope to get the SSC Utility working. This is unsupported printer right now. At least I will be able to freeze the counters then. I generated a TEST REPORT and tried to email them but their inbox was full. I will keep trying. Hope this EPSON CX 4600 is supported in their next version. It seems to be a popular printer.
Re: EPSON Adjustment Program by sunny (6/29/05 2:19 AM)
has someone of You the Epson Adjustment Program for the printer "Epson RX430". I looked into your forum and tried some links, but I couldn't find the right one.
Thank You for any help. My email ssunydream@nate.com
Re: Re: EPSON Adjustment Program by hendrie (6/30/05 6:21 AM)
d_link: Just so you will know: A Service Error where all LED's/Lights are flashing at the same time [some models the lights will be alternatly blinking], or where you get an "Unknown Error Message", or a "General Error Message", or even a message telling you that "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the waste ink pad/pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see exploded parts diagrams for most epson ink jet printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water. Then they simply dry them out and reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that waste ink counter reset procedure and performing it first, to make sure your printer will then work. You may be able to reset that waste ink counter, using the SSC SERVICE UTILITY available at http://inkjetprinterhelp.us/sscserve.exe . Unfortunatly, that utility only works using a windows operating system. You can check and see if your particular epson printer is compatible, by going to http://inkjetprinterhelp.us/epsonSSC.html ...Here's some previously posted info that may also help. "NEWUSER Re: Epson Error and power light flashing by newuser (4/5/05 11:10 AM). To reset the error download this utility: http://inkjetprinterhelp.us/epsonSSC.html . Once installed run the program and configure it, closing the main window and right clicking the icon in the tray area, from there choose Configure and select your printers model. After configuration, select Protection counter -> Reset protection counter, it should be able to clear the error message. If that does not actually work, then the only suggestion I can give is to perform a soft-reset before resetting counter. Remove also the Epson status agent, it detects errors and it may hinder communication with the printer, then reboot your pc. As profile choose the one sscservice didn't use after autoconfiguration, check for printer response. Remember that you should also clean the waste ink pads located at the printer bottom. For a more in-depth procedure by NEWUSER, go to his site at http://myprinter.altervista.org/simplefaq/mysimplefaq.html#counter "....Unfortunatly, that ssc service utility may not actually work on all epson printers and not on all operating systems, so you will have to check it out for yourself. Just in case that source does not work: You may actually need to go on-line to try and locate the actual reset procedure, to buy and download to reset that waste ink counter...There is an "Epson Stylus C60 Printer Information Page", that also includes the C42 series, that you can view at http://epsonhelp.freehttp.com/C60.html . It does have a section on the left side you can click-on, titled WASTE INK PAD SERVICING and also a section titled HOUSING REMOVAL, that may be of some help to you, if you want to try the needed servicing...Good Luck! Denny Conway
Re: EPSON Adjustment Program by Denny Conway (7/27/05 12:13 PM)
d_link: That last section should have actually read "There is an "Epson Stylus C60 Printer Information Page", that also includes the C43 series, that you can view at http://epsonhelp.freehttp.com/C60.html ."...Sorry about inserting the "C42" series, instead of your actual "C43" series...I hope that info helps...Again, Good Luck! Denny Conway
Epson C43SX prints nothing on paper. by veeselvaa (8/5/05 11:19 PM)
Denny Conway , You are really a genius in fixing problems with Epson Printers. I admire your effort in delivering the minute information that is required to solve problems in printer. Sir, I have a problem in my Epson C43SX printer. It printing nothing on the paper. I tried headcleaning for several times and got fixed and one fine day nothhing started to work. Its now printing a blank page. I disassembled the printer top cover assy and even dismantled the head unit after great patience in examining the locks in the Printer head unit and I washed it thoroughly with water and head cleaning solution. And i fixed it back . But of no use the Problem still persists . It prints only blank pages . But I find droplets of ink in the Cap assy. That means the ink flow is there in the head. Now I have a suspicion that there might be a gap between the head unit and the paper may have been increased after cleanin the head unit. Is there any adjustments that can be used to reduce the gap between head and paper ? I have two epson printers with same problem.
Kindly help me out of this problem. Regards Selvaa
Re: EPSON Adjustment Program by Denny Conway (8/8/05 4:48 PM)
Selvaa: I'm not actually trained on the newer epson printer models, so I'm not that framiliar with them. However, if ink is flowing thru the "Print Head Assembly", then you can assume its not clogged and that really only leaves a failing print head assembly, or possible even an electrical related failure. I'm sorry, but there's no gap adjustment that I am aware of. As the print head is very easily damaged, if it is actually removed, my guess would be that is what is wrong. Either that or there is no actual electrical signal getting to the print head from the main board assembly [loose electrical connection, bad board, or bad print head]. That electrical signal is what causes those nozzles to fire and print. No signal results in no printing, but the ink can still be pulled thru the nozzles by the vacuum type of force created by the pumping mechanism, so thats why you can see ink in the cap assembly area. I'm sorry that I cannot really be of any help to you...Denny Conway
Re: Re: EPSON Adjustment Program by Anonymous (8/14/05 3:51 AM)
every printer you buy comes with a free cd driver installer, what's with the problem of downloading? are you gonna download the drivers of it??? for safe keeping, keep a copy of the driver in your pc and keep the cd and protect it from scratch or whatsoever.... ^_^ ;-)
Re: EPSON CX 4600 - all lights flashing by Anonymous (8/22/05 8:04 AM)
I guess I shouldn't have tried everything all at once. My Magenta wouldn't print but all the other colors were okay. So I downloaded the SSCserver utility program, and soaked the sponge pad with cleaning solution for over 5 hours. I turned the printer on after the soaking, opened up the utility program, and found out the the utility program wouldn't recognized my printer. I have tried all the options and settings in the program with no improvement. I used Epson's own utility to run the head cleaning, with the same problem as before (no magenta). I soaked the pad again and injected some cleaning solution on to the spike for the magenta cartridge. Turned off the printer and went to sleep. Next morning when I turned on the printer, all the green lights were flashing, the 2 red lights (error and ink) were on steadily. The numeric read-out shows "E". Resetting power did not help. I even tried reloading the SSCserve utility hoping that it could do some magic. You would be correct if you guess that it did not. I would really appreciate any help anyone can offer.
Re: EPSON Adjustment Program by caniu2004 (8/25/05 6:25 AM)
hi, i´am from argentina, i have problem with epson c 65, the light on and off,, any idea??, thanks,
hola, soy de argentina, tengo un problema con la impresora epson c 65, las luces parpaean y ya he resetaeado con ssc y no pasa nada.. alguna idea, ? y sino, gracias igual,..,
Re: Re: EPSON Adjustment Program by The Island Man (9/7/05 11:12 PM)
Hi, I'm new to this stuff I have only been using a computer for about 2yrs. I have a two yr old setup Windows XP Pro and a Epson Stylus C62 I have learned a lot from my mistakes and I guess this is just another lesson. I have been refilling my Generic Cartridges and resetting them without any problems until I thought I could streamline this proceedure by using this fancy SSC Utility tool, well I guess it's a great tool if you know what your doing, but I don't know exactly what I did but the printer now has a flashing green and a steady on Red and keeps telling me " Black ink Cartridge Not Correctly Installed " ??? I've reset something ass backwards, I've reset the chips, changed cartridges, and nothing works the color is fine but it can't see the black,I took out a full cartridge and replaced it with an empty cartridge thinking it would still show full and work fine WRONG ! that's when I had first installed that Utility program, and the printer hasn't worked since. I would buy another C62 in a second if I knew where to find another one in good condition, it has been a great printer untill I did this ! This is the first negitive thing I've seen here about that utility program ??? Do I need a new printer or can I restore this one ? I know it's not the program it's just the Donkey pushin the buttons ??? But Here we Are ! Thanks Rod
Re: Re: EPSON Adjustment Program by wingoke (10/5/05 7:11 PM)
im nhanner, im computer technician i also repair printers, but i have a problem of this printer that i have fixed, its EPSON C65. I just want to know, if they can help me about the signal of this. I need badly the convertion of all signal. I've been disassemble all the parts. IF you can also send me the all function of its parts. pllsssss.... this is for my carier..
Re: Re: EPSON Adjustment Program by ojical (11/13/05 4:41 AM)
Hello all, in my case i have the adjustment program for the stylus 3000, but when i open the program... it looks nothing like the what the service manual is showing. For example the service manual show a "market setting" window, but i see a bunch of choices in different languages. Does anyout out there have documentation on how to navigate through this program? thanks in advance.
Re: Re: EPSON Adjustment Program by RelaxNow (11/23/05 2:42 PM)
Denny: I have the same problem (no ink flow on printing but good flow during cleaning) on EPSON Stylus Photo 785EPX. I also was guessing it was electrical. New cartidges don't make a difference. Any suggestions on where to test to see if electrical signal is getting to print head or what connections to jiggle? If it is printhead electrical problem, I presume it is time to throw the printer away. Thanks.
Re: EPSON Adjustment Program by maxima (12/19/05 6:15 PM)
Can someone send me the adjustment program for the Epson Stylus Pro XL? I need to align the black and color heads, more than can be done with "calibrate.exe". Thanks
Re: EPSON C45 Adjustment Program by udin (2/22/06 10:35 AM)
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges. 2) Reset or rewrite any chip using special addon device. 3) Freeze internal ink counters. 4) Reset internal ink counters even with empty cartridges. 5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode. 6) Hot swapping of cartridges supported. 7) Resetting of protection counter (even then it is already full). 8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!
Latest versions changes:
New in 4.10: - support for PM-970C - support for PictureMate - support for RX700 - support for R2400 - support for PM-A700 - support for PM-G720 - support for RX520 - support for CX7800 - support for CX4100 - support for DX3800 - support for CX3800/CX3810 - support for CX3700 - support for C67/68 and Photo Editions - support for C87/C88/D88 and Photo Editions - support for R220/R230 - support for R320 - support for CX4500 - support for CX3650 - various bug fixes
New in 4.00: - ability to work with additional reset device - support for CX4600 - support for CX5300 - support for CX5100 - support for RX420 - support for RX425 - support for RX620 - support for R1800 - improved support for almost all other printers - improved ink freezer - improved ink monitor, implemented status information - protection counter reset improvements - various bug fixes
New in 3.80: - support for C45/C46/C65/C85/C86 - support for CX-3600 - support for CX-6600 - improved support for R800 - improved support for SC-740 - improved ink freezer - protection counter reset improvements
Full version history is in the help file included in distribution.
Supported printer models >>>
Please, read all instructions in help file before doing anything with Your printer!
Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !
Program screenshots:
This menu can be accessed by right clicking on the application icon located in tray.
NOTE!
1) This is freeware project, so it is illegal to take money for this software.
2) Distribution of this software from any site other then inkjetprinterhelp.us or one of our official partners sites is prohibited!
(ñ) 2002-2006 SSC Localization Group
Send your test reports and support requests (with reports) to this e-mail
1) This software is provided "as is" without any express or implied warranty of any kind including, without limitation, warranties of merchantability, non-infringement or fitness for any particular purpose.
2) You are liable for all risks in relation to the quality or performance of this software. In no event shall SSC Localization Group or personally, author of this software, be liable for any damages whatsoever caused to you or the third party arising out of the use or inability to use this software. Damages include general damages, special damages, accidental damages or consequential damages (including, without limitation, loss of data or accuracy or unfitting interface for other programs, or problems with peripheral equipment).
2) You understand the risk of whole head or individual nozzles clogging in case of tardy replacing of empty cartridges, as well as risk of using hot swapping function (this inlude frequently cartridges replacement, or wrong deblocking of parking head on some models). You understand, that resetting the ink level counters or using ink freezer function implies responsibility to carefully watch ink levels in all cartridges and timely (as soon as You see any raw white bands, even in one color) replace cardridge.
I agree with all above statements and want to download software (v4.10)
Re: EPSON Adjustment Program by Anonymous (2/23/06 5:28 PM)
Hi! I'm from Mongolia. I had seen your massage in the forum. Could you send me this program? if you steel have it. Actually I need a Canon printer program. If possible please reply me.
Altankhuyag
Re: EPSON Adjustment Program by sadyoadhi (3/1/06 5:45 PM)
Hi!, i have a problem with my C67 epson, i can't print anything becouse my printer leds blinking and send me a massage "Parts inside your printer are at the end of their service life. See your printer documentation." anybody can help me to fix this problem?, i believe that not just me have this terrible thing...
big thx
Re: Re: EPSON Adjustment Program by Anonymous (3/2/06 10:14 AM)
I, too, have had this problem with two printers, both one month out of warranty. Epson say that they can only provide a refurbished unit under their out-of-warranty replacement program for UK£34. Not only that, when it happens the ink carts are locked in and you lose them, too - unless you remove the cover to rescue them, when you usually break at least one of the case retaining tabs. Poor design in my opinion.
Re: Re: EPSON Adjustment Program by Anonymous (3/6/06 7:32 PM)
I saw your mails about an Epson adjustment program. Can you inform me where can I meet the adjustment program for Epson Stylus 400. I think that the name of the program is J80C10E. Thanking in advance!!
Re: EPSON Adjustment Program by Anonymous (3/12/06 5:34 PM)
HI REGARDS FROM BRAZIL CAN ANYONE HELP ME TO FIND THE ADJUSTMENT PROGRAM FOR MY EPSON STYLUS C63? THANK'S FOR HELP ROBSON MERCURISNOSBOR@HOTMAIL.COM GOD BLESS YOU!
Re: EPSON Adjustment Program by mike42 (3/28/06 11:34 AM)
I have a Stylus photo 1290 and got some trouble whith the print head, after five years of good prints.
I bought a new one, replaced it, and I have now to make some adjustments.
I tried to use the epson adjustment program (SP8912913W98E), but after the first window (model name, port selection, destination, program type), I get an error message when I click the "OK" button : "communication error"
Has somebody any idea about what could be wrong ?
Thanks
Re: EPSON Adjustment Program by Chel (3/28/06 1:02 PM)
Make sure that the printer interface is plugged in and that there is no error on the printer. Turn on the printer and have it ready before you start the adjustment program.
Re: Re: EPSON Adjustment Program by Anonymous (3/28/06 4:24 PM)
The printer interface is OK, and I turn the printer on before starting adjustment program. I tried a lot of things, like to desinstall epson driver, to kill Epson status agent, but I always get this warning : "communication error" ! Another strange thing, when I use the SSC Service Utility program, it works very well !
michel
Re: EPSON Adjustment Program by macdeuce (3/31/06 1:03 PM)
I have an Epson Stylus 3000 and have purchased, through eBay, a manual on tearing the printer apart and, of course, and it came with the scserve.exe program, when I load this in DOS or in Windows DOS emulation mode, I do not get a clear screen command, so everytime a new page loads it types over the old and leaves too many characters to even read to adjust my printer. I know that was a really long run-on sentence, but it explains my problem. Has anyone else run into this problem and have a solution?
I am actually have an older Mac running a Rip Server for my office, and I know a little DOS, enough to get by on at least.
Thanks!
Re: EPSON Adjustment Program by macdeuce (3/31/06 2:03 PM)
Haloo om masalahnya sama nich epson C67 gw juga ngeblink nich gmana udah nemu tuh softwarenya kalo udah nemu bagi2 yach i juga sangat butuh nich trims Om
Re: EPSON Adjustment Program by Jammi (4/1/06 6:05 AM)
anyone that can find the Adjustment Program for C86?? i need it BAD i have it at work but not here at home if anyone could Mail it i would be REALY pleased
// former Epson Support Technician
Re: EPSON Adjustment Program by Anonymous (4/1/06 11:48 AM)
Google the "SSC SERVICE UTILITY" download it and configure it then click on the icon in the system tray. Click on "Protection Counter" and click on reset counter then ytpe "y" and you should be all set. The ssc service utility works on a lot of Epson models.
Re: EPSON Adjustment Program by macdeuce (4/3/06 8:20 AM)
Nevermind, I found out that DOS wasn't loading Ansi.sys, so it wasn't displaying correctly.
I still am having trouble getting one ink to show up though...I think its because I changed back and forth a few times between regular epson inks to archival inks then I started using DayGlo inks which are awesome!
Re: Re: EPSON Adjustment Program by Lynn Voyles (4/3/06 10:24 PM)
Running most Epson adjustment programs in Windows XP will give you a "communications error". The SSC utilities will work under XP. I had to install a dual boot system, Windows ME/Windows XP Pro, on my service computer in order to properly run the Epson adjustment programs.
Maybe this will help you.
Re: EPSON Adjustment Program by mike42 (4/7/06 12:17 PM)
Hello, Lynn. It's just the conclusion I arrived to. There is actually a problem between Epson adjustment program and windows XP. So I put the Epson program on another PC with windows 95, connected my printer to the LPT1 port, and all worked fine.
Thank for your answer.
Michel
Re: EPSON Adjustment Program by jacklee (4/8/06 2:14 PM)
Hi i have trouble with Epson C43 stop working. Green and red lights flshing says (parts in your printer have come to the end of there working life)can you help please.
Re: Re: EPSON Adjustment Program by Anonymous (4/9/06 8:13 PM)
Can anybody please please send me the epson adjustment program for the stylus photo r200. I have removed some internal parts of the printer and now i need the adjutment program to reset the eeprom. I have the service manual and the sscserve program, but i cannot continue untill i have this 'epson adjustment program'
Re: EPSON Adjustment Program by Anonymous (4/18/06 3:16 PM)
Can anybody please please send me the epson adjustment program for the stylus photo r200. I have removed some internal parts of the printer for repair, and now i need the adjutment program to reset the eeprom. I have the service manual and the sscserve program, but i cannot continue untill i have this 'epson adjustment program'
please send the program to robbie.bezzaford@gmail.com
Re: EPSON Adjustment Program by Anonymous (4/21/06 6:43 AM)
hi! can anybody please please please send a program adjustment for EPSONC45. Truly i'm so far for the service center, and i think i expend a half day to traveld. hopefully they have one mercy to help my problem.
Re: EPSON Adjustment Program by lou418889 (4/22/06 11:06 AM)
It appears that Epson is now zoning its printers so that for instance an Epson C67 sold in Asia has different firmware installed to that same model sold in Australia. Compatible chip makers are finding that their auto reset chips which work in the Asian model will not work on the Australian model, even though both printers take the same Epson cartridge. This may explain why the Russian CCS utility will not reset the waste tank on C67 Epson printer. The chip makers are having to modify their chips for the different zones, probably the software utilities for Epson will have to also allow for zoning. Expect more of this taking place as the printer manufacturers try and lock out the aftermarket industry.
Re: EPSON Adjustment Program by Anonymous (4/28/06 10:18 AM)
Yesterday i got this error message that parts inside my printer are at the end of their service life.
I read some posts on the internet that usually it is just a clogged up hose.
I was able to disassemble my cx5100 printer this morning then i washed the waste pads (i saw an enormous amount of ink dumped in there!)
After i washed it, i tried to start up the printer again but i got the same error message requesting me to contact service.
After i read the comments in this forum, i downloaded the SSC utility and reset the waste counter.
Thank you guys, i was planning to buy another printer tomorrow because i have still so many orders to print - BUT NOW i don't have to buy a new one anymore or go to any service center!
Re: EPSON Adjustment Program by ana (5/10/06 9:46 AM)
hi may i kindly request some help. i have a epson stylus color 400 which has a problem.when iswitch it on both red lites come on and stay on.i would like to know how to get it to print again.firstly how do i do a self test. and secondly how do i solve the problem. thirdly i have genuine eposn cartridges and i have cleaned the plastic assembly to the extreme right of the printer(looking form the front of the printer.it was broken by the owner and all 4 spring had come out i cleaned the pad with hot water and now everything works fine mechanically.may i please ask for some help with this issue.thanking you ALL IN ADVANCE JAY EXCUSE THE Writing hands covered in ink oops
Re: Re: EPSON Adjustment Program by Anonymous (6/13/06 3:25 AM)
hi benwong, This is abid from bangladesh. I have an Epson c87 printer which is giving an error message : "parts inside your printer are at the end of their service life. See your printer documentation". It does not print and both the red light are flashing. Can u pls suggest me wat to do? I'll be verymuch glad to u'r response.
Re: EPSON Adjustment Program by dboy kam (6/20/06 6:12 AM)
Printer which is giving an error message: "parts inside your printer are at the end of their service life. See your printer documentation". It does not print and both the green red light are flashing. Can u pls suggest me what to do? I'll be very much glad to u'r response.i download the SSC Service Utility but doesn't work to epson stylus C45 saying divice not found pls help
thank you
Lhoel YOu can e-mail me acon79er@yahoo.com
Re: EPSON Adjustment Program by lhoel (6/25/06 12:44 PM)
hey bros...can anyone pls help me..if you happen to have a program resetter or adjustment program for my epson C43 and C45 printers..or a program for maintenance error for the my printers..tnx for your help bros..
Re: Re: EPSON Adjustment Program by rugaray2k55 (7/1/06 7:58 AM)
hi benwong!i think i need the same what julio need.i had an epson c61 that doesnt print and i replace it with another c61printhead but still wont print.maybe i thought ill try using epson adjustment program but unfortunately i have no software for it. my e-mail address is reynaldo_paler@yahoo.com hope you can help me too!!! thanks in advance!
Re: EPSON Adjustment Program by Anonymous (8/8/06 6:11 AM)
HI, i'm Thang.I live in Vietnam I have a Epson stylus C87 have you got ajustment program for epson c200 if so could you send it to me thank you? help me
Re: EPSON Adjustment Program by N T Thang (8/17/06 2:08 AM)
I don't need reset, I don't need clean, I don't need the Service Manual, etc., etc,.. please, not insist with the SCC program or any other suggestions like this.
I'm ONLY need the EPSON Adjustment Program.
I change the head of my printer and I need to align this with the EPSON Adjustment Program and this is the only way. I have the Epson service manual but don't have the Adjustment Program for the Stylus Photo 700 and I can't found it.
Please, any body can help me with the right answer. I don't want pay for download this software.
I am having terrible problems printing - I have an Epson stylus D68 Photo Edition and I cannot get it to print - I have changed and cleaned several times but still no luck. It did print for a while and then I changed the ink cartrdiges but did not use the epson one, surely this wouldn't stop it from printing. I had used the similar ones previously. Any advice please anyone? I am loathe to have to buy a new printer. My printer is only about 3 months old and is not used too much.
Re: EPSON Adjustment Program by victor c (8/31/06 5:39 PM)
I need to thank somebody, on this thread I believe, for advice that flat-out worked, but I can't find your post to identify you. Do hope you see this or that someone passes it along to you. I had struggled doggedly but unsuccessfully to get my excellent little old Epson Stylus Color 670 back in service after washing the waste ink pads. You said WITH THE PRINTER OFF, PRESS THE PAPER AND INK BUTTONS, THEN POWER ON ... HOLD THE PAPER AND INK BUTTONS UNTIL THE PAPER LIGHT ONLY FLASHES ... THEN PRESS AND HOLD THE INK BUTTON UNTIL IT RESETS (ABOUT 10 SECONDS). It worked! Let me know if you see this.
Dear sir, madam printer is LX-300+ and after 1 year running in a warehouse (dusty environment). It seems that the printhead need to be re-allign (it prints shading characters). Ive spayed the gears & the stick that support the head(I don't know the name) with wd40, but no avail.
I've downloaded the LX300PADJ.ZIP and run the lx-300+.exe. It ask the belt name, printer select, setting file, process select, etc.. Sorry for this dumb question, but I don't know how to use this LX300PADJ, and I'm not sure about entering random values (afraid it could make it worse). Could anybody help me? Thank you very much in advance & sorry for my poor english..
Datum
Indonesia
Re: EPSON Adjustment Program by datum (9/7/06 2:40 AM)
in addition I have 2 LX-300+ printers that have this kind of problem, sent them for service in local store but the technician gave up. Currently I'm depending on my last LX-300+ and I'm afraid the last one sooner or later will have this 'disease'. Tried to prolonged it's life though by using covers and lubrication, but i'm still curious about this. As LX-300+ price is still about US$170 in Indonesia, I don't like the idea of buying another LX-300. Could anyone suggest a similar printer that's more/equally reliable?
I've used this printer to print invoices on contionous form, and really love it. But, you know, just in case... Many thanks
Re: EPSON Adjustment Program by irwannn (9/7/06 8:09 AM)
i need some 1 how as a adjustment program 4 a C46 epson Printer amd not 4 the ink reset i now how to rest the ink thank you can some one help me thank you
Re: EPSON Adjustment Program by irwannn (9/8/06 7:47 AM)
EPSON Adjustment Program for CX4100/cx4200/cx4700/cx4800/dx4800/dx4850 cannot use because it always show it's expired eventhough I changed date and did instruction that enclosure with this file but it's still not work.... How can I solve this program??
Thx
Re: Re: EPSON Adjustment Program by asaxp (9/12/06 9:21 AM)
my c87 can't work (ink & paper LED was blinking) message : General Error , Adjusment Program cannot work with situation like that,what is it? can anyone help me & please send me service manual to : cigradigital@yahoo.co.id
Re: EPSON Adjustment Program by work5 (9/20/06 8:49 PM)
I have the Epson stylus c46 It was working fine yesterday. I changed the colour ink cartridge and had to clean the nozzels. The all of a sudden I got the message saying "service required" and my printer wont do anything. I am totally confussed. I really dont know what to do. I probably sound thick but even reading all the above baffles me!
If anyone could help me and point me in the right direction of getting the printer to just print again I would be most greatful.
I'm in need of it to work again asap. Please email me at MOOSHeeSHAxx@aol.com
Thanks Michelle xx
Re: EPSON Adjustment Program by work5 (9/27/06 5:59 AM)
I badly need it, but the site won't let me download it for free. Every time I try, I get a message saying the download failed but it wouldn't have if I'd had a paid membership. I can take a hint...
Runesmith
Re: EPSON Adjustment Program by sarah@uni (10/6/06 7:14 AM)
hey, i brought my epson stylus dx4850 to uni and i forgot/ lost the software that came with it, could anyone tell me where i can download or buy the software to make it work on my laptop. thanks, sarah. p.s one of my ink head th magenta is damaged, and when i was back home i ran the programs to clear the nozzles but it onl worked so much, is there ne thing else i can do? xxxxxxxxx
Re: Re: EPSON Adjustment Program by manic_tech (10/6/06 8:05 AM)
hey sarah my only advice would be go to http://www.epson.com and with the magenta try printing a couple of pages in magenta hopefully that will clear it a little if all else fails bin it and buy a new one :P kiddin :)
Re: EPSON Adjustment Program by C80 man (10/8/06 11:01 AM)
did you get that c61 adjustment program? could you send it to me also please. i just visit the site and it says download is not available anymore thanks,
reynaldo
Re: Re: EPSON Adjustment Program by Anonymous (12/12/06 5:26 AM)
hi benwong this prime from philippines thanks for your help kindly send me a adjustment program for stylus c65, This is my email add. praymo99@yahoo.com
thanks a lot,
prime
Re: Re: EPSON Adjustment Program by Anonymous (1/1/07 2:21 PM)
I need to repair around 20 Epson Stylus Color 800 printers. Most of them have been a piece of cake, others have had to have the printheads removed.... which causes the need for the alignment software. Please, please, please.... If anyone knows about this allignment program from Epson.... Please, please, please contact me at christo_lew@earthlink.net
I have tried to use SC8085ADJ.exe, but to no avail :-(
Re: Re: EPSON Adjustment Program by Anonymous (1/13/07 1:42 PM)
