Help Canon BJC 6000

	Help Canon BJC 6000 by Nicky (9/14/04 3:54 PM) reply	+ / -
I replaced the black ink cartridge and my printer printed yet about 2 weeks later it stopped printing. It goes through the process of printing and makes the noise yet when its done the sheet of paper is blank. What do I do?

	Re: Help Canon BJC 6000 by Rudy (9/14/04 4:14 PM) reply	+ / -
It is entirely possible that the cartridge (printhead) itself has failed. What you replaced was just the ink tank. Clean the printhead and it's contacts with distilled water. A link to canon support is located on the home page here...scroll down.

	Re: Help Canon BJC 6000 by Nicky (9/14/04 10:15 PM) reply	+ / -
Thanks, but it still didn't work. Do you think it's possible that i have to change the blue, red and yellow ink cartridges as well?

	Re: Help Canon BJC 6000 by Nicky (9/14/04 10:18 PM) reply	+ / -
Thanks, but it still didn't work. Do you think it's possible I have to replace the red, blue and yellow ink cartridges as well???

	Re:Canon BJC-5000 waste ink tank full by Mike (9/30/04 6:48 PM) reply	+ / -
What is the Waste ink tank reset procedure for a BJC-5000 unit? I've tried the reset for the BJC-3000 & BJC-5100 with no sucess,

	Re: Help Canon BJC5000 by Printx (9/30/04 7:26 PM) reply	+ / -
Waste Counter Reset Procedure 1: Power off printer 2: Press and hold RESUME then press POWER, The indicator will start blinking. 3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode 5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN. 6: Press Power to set data

	Re: Help Canon BJC 6000 by Daniele (10/6/04 11:48 PM) reply	+ / -
la mia stampante dopo aver premuto il power fa 6 bib e poi non fa nulla. Ho provato a cambiare la testina,le cartuce e l'ho portata a fare controllare da un tecnico che mi ha detto che è un problema di scheda; ma allora, perchè quando è accesa se apro il coperchio la testina si posiziona al centro come dovrebbe fare?mi hanno detto che il raccoglitore dell'inchiostro potrebbe essere pieno e questo la fa andare in errore e mi hanno anche detto che ci dovrebbe essere un software che permette il reset. Sapete se potrebbe essere questo e dove posso trovare qualcosa che spieghi come fare a risolvere questo problema? grazie

	Re: Help Canon BJC 5000 part 2 by Mike (10/8/04 7:39 AM) reply	+ / -
Tried following procedure: 1: Power off printer 2: Press and hold RESUME then press POWER, The indicator will start blinking. 3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode *** BUT never get beeps, blinks green for several seconds, then continues to blink orange(6orange 1 green) 5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN. *** Never get solid green light 6: Press Power to set data Need extra help to reset service code ! !

	Re: Help Canon BJC 6000 by al (10/9/04 10:15 AM) reply	+ / -
worked on my 6000: instead of power off try to unplug power, press down needed buttons and then plug in.

	Re: Help Canon BJC 3000 by anita (10/12/04 7:47 AM) reply	+ / -
I changed the black ink cartridge in my printer, and now it won't print. Just gives me error messages. I have unplugged, unloaded, reloaded. Ineed help!!!!!!!!!!!!!

	Re: Help Canon BJC 6000 by Anonymous (10/25/04 12:00 PM) reply	+ / -
My printer (Canon BJC-6000) is showing a steady orange light n bleeping occasionaly. i have unplugged it,cleaned it,done print head alignment,uninstalled n reinstalled it,loaded paper. but it still wont print . i dont know what the indicater light is trying to say. the printer was originaly installed on windows 98 but we r now on xp pro.is it pos it cant handle this? i cant remeber if it eva worked on xp. any advice please.cheers.amy

	Re: Help Canon BJC 6000 by chris (11/4/04 1:55 PM) reply	+ / -
Hi I have cleaned the waste tank but the printer will only print using black ink is there a special code to use ??

	Re: Help Canon BJC 6000 by chloe (12/14/04 6:29 PM) reply	+ / -
Hello, I have the same problem with the first posted message. My canon bjc-6000 won't print black, I have changed the toner & the printer head too, still would'nt work. I tried to do deep cleaning on the printer head, still no result! It is a nice inkjet printer and I hate to get rid of it. Please help!

	Re: Help Canon BJC 610 by Claudio (2/15/05 12:15 AM) reply	+ / -
PLease, could someone help me with the same problem on a BJC-610? (Reset procedure). Many thanks

	Re: Help Canon BJC 6000 by Denny Conway (2/16/05 2:49 PM) reply	+ / -
I'm sorry, but I do not usually work on Canon Printers, so I'm not really framiliar with them. The following web-site links may be useful in the future, if they don't help you right now. SITE #1: http://canonhelp.freehttp.com/ . A "Canon Help Page" for Error Codes, thats for a lot of the "BC" and "BJC" Printers. SITE #2: http://www.usa.canon.com/html/conCprTSIndex.jsp . A Canon USA Technical Support page. SITE #3: http://www.usa.canon.com/html/conCprSupport.jsp . A Canon USA "Contact Canon" site for PRODUCT INFORMATION/TECHNICAL SUPPORT. SITE #4: http://www.usa.canon.com/html/conCprTSIndex.jsp?app=download . A Canon USA "Download Library" web-site. SITE #5: You can also try http://www.uktsupport.co.uk/canon/canonidx.htm , for possible help. I'm told that is a great site for older canons and includes information on the waste ink error...I hope this helps! Denny Conway

	Re: Re:Canon BJC-5000 waste ink tank full by Cristiano (3/15/05 4:06 PM) reply	+ / -
Excuse-me, Could you tell me the procedure for bjc-5100? or where I can find it? Thanks

	Re: Help Canon BJC 6200 by msapl (7/20/06 4:14 PM) reply	+ / -
How do I clean and replace the pads and units which deep clean the printhead. I have tried cleaning and now the pads snag the printhead with each pass.Any ideas?

Post to this thread:

User:
Email:
	Notify me if someone responds
Icon:
Subject:
Message: